[C38] seperating the coupling

[bob gouley]

     I would like to sepaerate the coupling on my engine 5424 type, It is held together by four bolts that I removed but the coupler will not come apart. I am worried about damage if I force it apart.  The coupler has llarge bolts with rubber washers on the circumference, I don`t think these are to be removed?  Currently I am soaking the shaft set screws with penetrating oil, as I can`t budge them, next is to seperate the coupler, any advice would be greatly appreciated. bob

Zephyr # 142
ST Joes Island 
Ontario Canada
r.gouley at sympatico.ca 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20081023/74d00dea/attachment.htm>