[C38] Traveler Location?
Steve Smolinske
SSmolinske at rainierrubber.com
Tue Sep 15 22:34:34 EDT 2009
Bill, I have 5:1 doesnt seem to be a problem
________________________________
From: listserve-bounces at catalina38.org on behalf of William Knowles
Sent: Tue 9/15/2009 4:13 PM
To: Catalina 38 Listserve
Subject: Re: [C38] Traveler Location?
A little off the subject. Could I move a 6 to 1 purchase directly from the track? Or will it pull the track off the boat? Thinking of using my boom vang tackle, when I replace with a ridged vang (don't tell my wife)
Bill Flying Goose
On Mon, Sep 14, 2009 at 10:13 PM, Steve Smolinske <SSmolinske at rainierrubber.com> wrote:
My traveller is also about 1' aft of the hatch opening on the deck.
________________________________
From: listserve-bounces at catalina38.org on behalf of david at dlrfilms.com
Sent: Mon 9/14/2009 6:47 AM
To: tdtron at earthlink.net; Catalina 38 Listserve
Subject: Re: [C38] Traveler Location?
Thanks for the photo Tom! Much appreciated!
I'm out to the boat today to mock up some end boom sheeting and see where
everything hits. When I do lines while my wife is at the helm I end up
standing halfway in the companionway to manage the traveler and mainsheet,
and I don't especially like that. I'm sure end boom sheeting will have
annoyances of it's own.
> I've attached a photo of my factory located traveler. The problem with
> any
> mid boom traveler is it puts great strain on the boom but it does free up
> the cockpit. Moving a mid boom traveler attachment farther forward of the
> boom would put excessive loads on the boom which is already strained.
>
> We have an older Catalina 27 with end boom sheeting. I bought the boat
> for
> lake racing near our home and one reason I decided on an older 27 was
> because it had end boom sheeting instead of the mid boom sheeting found on
> later models.
>
> Tom Troncalli
>
>
>
>> [Original Message]
>> From: <david at dlrfilms.com>
>> To: Catalina 38 Listserve <listserve at catalina38.org>
>> Date: 9/13/2009 10:47:52 PM
>> Subject: Re: [C38] Traveler Location?
>>
>> I just want to make sure I'm understanding you. Your traveler is forward
>> of the hatch opening, correct? That would solve my dodger problem, but
>> I'm concerned about the loss of leverage having the sheet so far forward
>> on the boom, or the leverage the sail/boom would have on the anchor
>> points. You've had no problems?
>>
>> Thanks!
>>
>>
>> > I replaced my stock traveler with a Gerhaurer. I placed it in the
>> same
>> > place as the old one. It is just forward of the hatch. I also
>> replaced
>> > my
>> > main and jenny with a new suit from Pineapple Sails but the old sails
> were
>> > standard C38.
>> >
>>
>>
>>
>> _______________________________________________
>> Listserve mailing list
>> Listserve at catalina38.org
>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
No virus found in this incoming message.
Checked by AVG - www.avg.com <http://www.avg.com/>
Version: 8.5.409 / Virus Database: 270.13.95/2368 - Release Date: 09/13/09 17:50:00
_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
--
W H Knowles
-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 7125 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20090915/0f238a4f/attachment-0001.bin>
More information about the Listserve
mailing list