[C38] Secondarys (Alden)

[PAUL NOTTE]

Another question , did or does your boat have secondarys to the right or left of the hatch. Mine does not practical for single handed. It makes more sence to have them where yours are

 paul



----- Original Message -----
From: Steve Smolinske <SSmolinske at rainierrubber.com>
Date: Wednesday, September 23, 2009 2:38 pm
Subject: Re: [C38] Secondarys (Alden)
To: Catalina 38 Listserve <listserve at catalina38.org>

> Alden, are yours secured underneath in the cockpit cubbies? Or farther
> aft? 
> 
> -----Original Message-----
> From: listserve-bounces at catalina38.org
> [mailto:listserve-bounces at catalina38.org] On Behalf Of alden Andre
> Sent: Wednesday, September 23, 2009 9:51 AM
> To: listserve at catalina38.org
> Subject: Re: [C38] Secondarys (Alden)
> 
> Steve , I use Anderson 42s for my secondarys (pics attached) .
> Personally I never use the primarys, the Anderson 42s work well 
> for the
> headsails and spinnakers. When I am by myself it is very easy to 
> use by
> your self and when the crew is on board they like the smaller 
> 42s and
> say they have more power and grip than the big 52 3 speed 
> lewmars. I put
> backing plates on them when I installed them and have been in 
> big wind
> for 4 years and have not seen any cracking at all.  If you 
> want you can
> run down here to PDX and take a look before you drill.
> 
> Alden
> FLYBYE C-38
> 503-929-8814
> Alden642 at comcast.net
> 
> -----Original Message-----
> From: listserve-bounces at catalina38.org
> [mailto:listserve-bounces at catalina38.org] On Behalf Of
> listserve-request at catalina38.org
> Sent: Wednesday, September 23, 2009 9:00 AM
> To: listserve at catalina38.org
> Subject: Listserve Digest, Vol 5, Issue 328
> 
> Send Listserve mailing list submissions to
> listserve at catalina38.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> or, via email, send a message with subject or body 'help' to
> listserve-request at catalina38.org
> 
> You can reach the person managing the list at
> listserve-owner at catalina38.org
> 
> When replying, please edit your Subject line so it is more 
> specific than
> "Re: Contents of Listserve digest..."
> 
> 
> Today's Topics:
> 
>    1. secondaries (Steve Smolinske)
>    2. Re: secondaries (Robert Miller)
> 
> 
> -----------------------------------------------------------------
> -----
> 
> Message: 1
> Date: Tue, 22 Sep 2009 19:39:38 -0700
> From: "Steve Smolinske" <SSmolinske at rainierrubber.com>
> Subject: [C38] secondaries
> To: "Catalina 38 Listserve" <listserve at catalina38.org>
> Message-ID: 
> <392501BCC93AAC4EA94D28D8DB159922086DF7 at sockeye.4M.local>Content-Type: text/plain; charset="iso-8859-1"
> 
> Im planning on installing secondaries tomorrow, I have lewmar 40s.
> Laying it out tonight im concerned that the hole pattern places the
> outside holes to close to the edge of the coaming to be able to 
> get a
> nut on underneath.  Anyone out there with experience 
> drilling in this
> area.  Im looking at putting them above the aft hinges on 
> the two
> lockers.  Thanks.
>  
> Steve
> Peregrine #312
> Seattle
>  
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20
> 090922/13fbd600/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 2
> Date: Tue, 22 Sep 2009 22:08:14 -0700
> From: "Robert Miller" <chapuys at aol.com>
> Subject: Re: [C38] secondaries
> To: "'Catalina 38 Listserve'" <listserve at catalina38.org>
> Message-ID: <A1083EFA300449FFAB8FACFB4491E861 at robertmiller>
> Content-Type: text/plain; charset="us-ascii"
> 
> My secondaries are 2 speed Lewmar 30s.  They are more than 
> enough for
> the asymmetrical
> 
>  
> 
> Bob Miller
> 
> "Bolero" at Southwestern YC in San Diego.
> 
>  
> 
>  
> 
>  
> 
>   _____  
> 
> From: listserve-bounces at catalina38.org
> [mailto:listserve-bounces at catalina38.org] On Behalf Of Steve Smolinske
> Sent: Tuesday, September 22, 2009 7:40 PM
> To: Catalina 38 Listserve
> Subject: [C38] secondaries
> 
>  
> 
> Im planning on installing secondaries tomorrow, I have lewmar 40s.
> Laying
> it out tonight im concerned that the hole pattern places the outside
> holes to close to the edge of the coaming to be able to get 
> a  nut on
> underneath.
> Anyone out there with experience drilling in this area.  Im 
> looking at
> putting them above the aft hinges on the two lockers.  Thanks.
> 
>  
> 
> Steve
> 
> Peregrine #312
> 
> Seattle
> 
>  
> 
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.409 / Virus Database: 270.13.112/2388 - Release Date:
> 09/22/09
> 17:54:00
> 
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20
> 090922/8c51f3fb/attachment-0001.html>
> 
> ------------------------------
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> 
> 
> End of Listserve Digest, Vol 5, Issue 328
> *****************************************
> 
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.409 / Virus Database: 270.13.112/2390 - Release Date:
> 09/23/09 05:52:00
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20090924/1f946b63/attachment-0001.htm>