[C38] The deck/hull joint
Charles Finn
charles at finn.ws
Mon Mar 15 21:27:05 EDT 2010
Max,
I was planning on going around the boat on a ladder with a moto tool
working between the toe rail and the hull. I think I would have to
completely remove the toe rail to get at it from the deck side. I did
that once on a 21 foot sailboat and won't ever do it again!
I was planning on taping the toe rail and the hull, and then forcing the
5200 in through a narrow tip and smoothing with a wet finger.
Chuck
Max Soto wrote:
> Charles,
>
> Where are you planning to do it, under the toe rail on the hull side
> or deck side??
> Regards,
>
> Max
>
> 2010/3/15 Charles Finn <charles at finn.ws <mailto:charles at finn.ws>>
>
> I plan on taking a roto tool to this joint this spring (had
> planned on doing this last year, but ran out of time). I suspect
> I am getting some leaking in heavy seas, which I saw a lot of over
> the past two years. It is filled with some kind of caulk and my
> thinking is to route at least 1/4 inch and then fill it with 5200.
> Has anyone done this?
> Chuck Finn
> Mighty Quinn #114
> Great Lakes
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org <mailto:Listserve at catalina38.org>
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
More information about the Listserve
mailing list