[C38] crevice corrosion?

[Don Strong]

Steve:
My friend the marine engineer told me that what we worry about in tiny 
protected areas of stainless steel, and with low grades of stainless 
that have impurities, is called crevice corrosion. The Wikipedia has a 
post that begins,

"The corrosion resistance of a stainless steel is dependent on the 
presence of a protective oxide layer on its surface, but it is possible 
under certain conditions for this oxide layer to break down, for example 
in reducing acids, or in some types of combustion where the atmosphere 
is reducing. Areas where the oxide layer can break down can also 
sometimes be the result of the way components are designed, for example 
under gaskets, in sharp re-entrant corners or associated with incomplete 
weld penetration or overlapping surfaces. These can all form crevices 
which can promote corrosion. To function as a corrosion site, a crevice 
has to be of sufficient width to permit entry of the corrodent, but 
sufficiently narrow to ensure that the corrodent remains stagnant. 
Accordingly crevice corrosion usually occurs in gaps a few micrometres 
wide, and is not found in grooves or slots in which circulation of the 
corrodent is possible."...

http://en.wikipedia.org/wiki/Crevice_corrosion
  Don


S Orton wrote:
> I was going to replace my life lines as recommended by the CC, but on 
> detailed inspection, I declined.  My reasoning:
> 1.  Where there was rust at the swaged end fitting, I cut away the 
> plastic, cleaned up the wire with a "fine" wire brush rotary tool, 
> bent the wire back and forth, and observed no failed strands.
> 2.  As far as know Catalina still uses coated wire and West Marine 
> still sells the stuff.
> 3.  I don't understand this oxygen deprived corrosion.  When you think 
> about the roller swaging of the end fittings on all our rigging, there 
> isn't much oxygen moving into the fittings.  It has to be rather 
> stagnate inside the fittings.
> 4.  My surveyor told me this was a "recommended" not a "mandatory" 
> requirement and it didn't affect my insurance.
> 5.  I'm not a metallurgist by training, but in my previous life, I 
> worked as a ME in aerospace for 40 years, working with corrosion 
> resistant materials and never coming across the term "oxygen deprived 
> corrosion" in SS.  If some body has some factual engineering info on 
> the subject I would love to read it.
> With that said I inspected every inch of the life lines, looking for 
> rust marks, cutting away the plastic, and found no broken stands of 
> wire (fish hooks).  Now I did replace my rigging (25 yrs old) at a 
> material cost of $1700.
>  
> Cheers, Steve O (Santa Susanna- #304)  
> > From: 1derful at comcast.net
> > To: Listserve at catalina38.org
> > Date: Thu, 8 Jul 2010 19:49:45 -0700
> > Subject: [C38] Life-lines
> >
> > Someone suggested I replace my life-lines because they are coated in 
> plastic
> > so I can tell if they are fraying. They advised stainless steel. Seems
> > like an expensive retro-fit.. I can't remember every really using 
> the life
> > line to prevent falling overboard.
> >
> > Also does anyone know the height of our Catalina 38's? I've been going
> > under some bridges lately and from the cockpit it looks as though I 
> am gonna
> > lose my mast. Hasn't happened yet.
> >
> > Patrick
> > Blue eyes
> > S F Bay
> >
> >
> > _______________________________________________
> > Listserve mailing list
> > Listserve at catalina38.org
> > http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
> ------------------------------------------------------------------------
> Hotmail is redefining busy with tools for the New Busy. Get more from 
> your inbox. See how. 
> <http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_2> 
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>   

-- 
Donald R. Strong
Professor
Department of Evolution and Ecology
University of California, Davis 95616
530 752-7886


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20100710/3b6f605b/attachment-0001.htm>