[C38] Bilge Pump and mast leak

Max Soto maxsoto at gmail.com
Mon Nov 22 15:28:56 EST 2010


What about the vents on the transom??max

Sent from my iPod

On Nov 21, 2010, at 11:49 PM, "Phil Gay" <eyriepg at comcast.net> wrote:

> Some things seem impossible.  About 6 years ago I hauled Que Linda to paint the bottom.  Since any bilge water leaks out the Catalina smile and onto the fresh bottom paint,  I carefully scooped and sponged out the bilge.  Living in Washington state, it rained for the next 2 days interrupting my bottom job.  When I looked in the bilge, I was amazed to find 2” of water.  There must be a way that rainwater gets into the bilge other than down the mast.  It also must have a way to run under the hull liner so that you don’t see it inside the cabin.
> 
>  
> 
> Phil Gay
> 
> C38 049 Que Linda
> 
> Everett, WA
> 
>  
> 
> From: listserve-bounces at catalina38.org [mailto:listserve-bounces at catalina38.org] On Behalf Of Chuck Finn
> Sent: Sunday, November 21, 2010 8:33 PM
> To: Catalina 38 Listserve
> Subject: Re: [C38] Bilge Pump and mast leak
> 
>  
> 
> Steve,
> I am at a mooring and wave action does leak into the bilge.  Especially when the water tank is empty, which is often the case when I moor.  
> I agree that one of the best/better upgrades was the spartite plug for water leakage and structural integrity.  
> 
> But, here is my problem with the mast leakage resulting in gallons of bilge water.  The math does not work.  Even a monsoon rain would not result in gallons of water in the bilge.  Imagine you left a hole the size of our mast open during a rain and calculate what perhaps a 1/2 square foot of surface area would allow.  One inch of rain would result in maybe 72 cubic inches of rainwater.   That is about a quart of water....  (1.3 quarts at most).  
> If you want to argue that stays, etc. add more surface area, then we could maybe account of 3 quarts at the very most.
> 
> If you want to see where the water is coming from.  Pump down your bilge and towel dry the areas below inlets.  Put some blue contractors chalk down between the inlet and the bilge and wait a day.  
> 
> This is interesting!
> Chuck Finn
> Mighty Quinn,   #114
> Great Lakes
> 
> 
> 
> 
> 
> On 11/21/2010 1:57 AM, S Orton wrote:
> 
> Chuck,  I believe the top of the rudder post is above the waterline when the boat is at rest in the slip, so there should be no leakage from the post.  Now under way with a stern wave, that's a different story.  When I return from a sailing trip I dry the bilge with a towel and it will stay reasonable dry (not over a cup, probably from condensation) if it doesn't rain.  With rain the Rule bilge pump like about two gallons for company.  Also for those who don't have a Spartite plug, I would highly recommend the upgrade, not only from a leakage standpoint, but the resin plug is a structural improvement- giving an "even" lateral support to the mast at the mast collar, vs the point contact force using the wood wedges.
>  
> Cheers, Steve O (Santa Susanna #304)
>  
> 
> Date: Sat, 20 Nov 2010 21:03:08 -0500
> From: charles at finn.ws
> To: listserve at catalina38.org
> Subject: Re: [C38] Bilge Pump and mast leak
> 
> While some water can certainly come down the mast, I doubt you are getting gallons.  If you don't have a Spartite plug at the mast/cabin connection however, there will be quite a bit...  
> I am willing to bet most of the water is actually coming through the rudder post fitting.  I always have water in the bilge and can actually see a wet path from the rudder post to the bilge.  For years I thought the flow came from the shaft coupling, but I took some blue contractor's chalkline chalk and sprinkled it above the shaft coupling which almost immediately indicated the problem after only a couple of waves....
> Several years ago we had a great discussion about this and someone (Tom T. I think) talked about where we could obtain a boot.
> I of course, did not get one....  Sure would like to hear from someone who has a better memory about this than I do!
> 
> All the best,
> 
> Chuck Finn
> Mighty Quinn with two bilge pumps and a wet bilge,  #114
> Great Lakes
> 
> 
> On 11/20/2010 8:23 PM, Larry Malmberg Live wrote:
> 
> Same here and it seems that we always have some water in the bilge.  How about the rest of you guys and gals on here, water consistently in your bilge?
> 
>  
> 
> 
> 
> 
> 
> Best regards,
> 
> Larry Malmberg
> Team Hassle
>  
> 
>  
> 
>  
> 
> From: listserve-bounces at catalina38.org [mailto:listserve-bounces at catalina38.org] On Behalf Of Robert Miller
> Sent: Saturday, November 20, 2010 2:48 PM
> To: 'Catalina 38 Listserve'
> Subject: Re: [C38] mast leak
> 
> I always flick on my bilge pump to the spring loaded manual position whenever I go aboard.  Just to check.  My boat is weird.  When I fill my fresh water tank it vents into the bilge when it is full.  When the bilge pump comes on, I can tell it is full.
> 
>  
> 
> Bob Miller
> 
> “Bolero” #113 at Southwestern YC in San Diego.
> 
>  
> 
> From: listserve-bounces at catalina38.org [mailto:listserve-bounces at catalina38.org] On Behalf Of Steven Ribble
> Sent: Saturday, November 20, 2010 1:38 PM
> To: Catalina 38 Listserve
> Subject: Re: [C38] mast leak
> 
>  
> 
> Paul, you know about "never" and "always"...  actually there WAS ONE TIME I got on board after being gone for the week 
> (or more) and I found the bilge was dry...but then again it didn't rain during that period.
> 
>  
> 
> I used to have a Lovett 1200 bilge pump and I'd typically found about a gallon in the bilge after being away for a while...now I have a Rule and I usually find about 2-1/2 gallons...guess that's what I get for trying to save $$!  I've done occasional [taste] tests of the water because I was concerned that I had a hull leak but I've never noticed it to be salty (I know, not the smartest test to do)...so I've always assumed it was from the mast.  If you are getting salt water in the bilge you should go on a safari to find its origin because not only is it unhealthy for your keel bolts, you may have big problems if your bilge pump gives out (like mine did - water was just below the salon floor when I discovered it wasn't working).
> 
>  
> 
> Steve
> 
> On Sat, Nov 20, 2010 at 3:17 PM, PAUL NOTTE <panotte at shaw.ca> wrote:
> 
> Am I to understand some boats do not  ALWAYS  have water in the bildge? One of my weekly things to do is add fresh water to the bildge  to flush out any sea water is this wrong ?
> 
>  
> 
>  
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20101122/534bdcb7/attachment-0001.htm>


More information about the Listserve mailing list