[C38] Stanchions

[Tom T.]

After hurricane Dennis (the Menace) skirted Tampa Bay a few years ago with a near miss, we got tangled up with a piling with the surge and had our starboard lifelines damaged along with the stanchions on that side.

I replaced the stanchions near the rail at the aft end of the cabin with Catalina Direct stanchions. I replaced both sides so they would match.  My boat had standard stanchions and those stanchions should have been the reinforced gate entry types which are heavier and more expensive.

I didn't shop Garhauer and I probably should have but the original stanchions were JUNK so anything was an upgrade!  The metal in the replacement stanchions was much heavier gage and with the reinforced foot design of the gate type stanchion there was no comparison between quality or strength of the two types.

The reason I bring this up is some of our members may have stanchions like the ones I replaced which may be a disaster waiting to happen.  If the stanchions at the front of the gate are like the thin, weak ones like I had they could fail.  The thin tube original stanchions may be OK for middle of the lifeline mounts but where the gates terminate they are inadequate

Tom Troncalli

----- Original Message ----- 
From: Max Soto 
To: Catalina 38 Listserve
Sent: 1/25/2011 12:00:20 PM 
Subject: Re: [C38] Stanchions


Steve, do they have the same footprint???
Regards, max

Sent from my iPod

On Jan 25, 2011, at 9:30 AM, Steven Ribble <steve.ribble at gmail.com> wrote:


Our stanchions are Garhauer...I replaced a couple last season...about $50 each.


On Mon, Jan 24, 2011 at 7:06 PM, Max Soto <maxsoto at gmail.com> wrote:

Hey Steve,


I'm not surprised if they were made by Garhauer......


Regards,


Max


2011/1/24 Steve Smolinske <SSmolinske at rainierrubber.com>

Does anyone know who made our stanchions?  


Steve Smolinske
President 

425-227-4500
www.RainierRubber.com

The information contained in this email may be confidential and/or proprietary in nature and is intended for the recipient of the email only.  Please treat all information contained in this and any communication with the 4M Company as such.  Thank you.

P Before printing, think about ENVIRONMENTAL responsibility



_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org





-- 
Max Soto
C38 #198 ESTANCIA
Puntarenas, Costa Rica


_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org





-- 
Steve Ribble
207/852-0971

_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20110125/ed057f7b/attachment-0001.htm>