[C38] Rudder Drop Woes
david at dlrfilms.com
david at dlrfilms.com
Tue Apr 5 08:31:22 EDT 2011
Well I have to admit this has me confused.
As far as I can see, there are only four bolts holding each side of the
quadrant around the rudder-shaft, plus a big drift that pierces both
pieces and goes through the shaft as well.
I called Catalina tech department yesterday and he said there weren't any
other bolts. Just the four (two on each side of the shaft clamping the two
pieces of the assembly around the shaft.)
I don't see any other bolts holding the the two pieces together, but just
because I don't see them doesn't mean their not there, right?
Oy.
>
> Hey David,
>
> Dont cut the quadrant off the rudder just yet! I just went through a
> multiple day epic trying to remove the steering quadrant so I could pull
> the rudder after we had a run-in with a whale a few weeks ago. Believe it
> or not, we got nudged by female humpback while rounding the SE corner of
> Oahu during a circumnavigation of the island. She hit us broadside and
> clipped the bottom of the rudder, bending the bottom about 6" to the
> starboard side. The whale was fine (prop not on) and she barely skimmed
> the bottom of the rudder). The boat won't turn right at all, but she
> turned left enough to get us home safely and spend the night out sailing
> on that Tsunami day a few weeks ago.
>
> So to pull the rudder out (while in the water), I had to remove the
> steering assembly, and those 5 bolts holding the quadrant to the rudder
> post were an incredible pain to break free. I eventually had to borrow an
> 3/8"-drive impact gun and large compressor from a mechanic friend.
> Although the gun eventually did break them free, it still took the
> combination blow torch, PB blaster, and cranking on each bolt with the gun
> for about 40 minutes each to break them free. It was amazing how stuck
> they were in there (and how much space you dont have working down there!).
> There are also the two little machine head screws (with nuts) that hold
> the edges of the two quadrants together (the ones Steve had mentioned),
> that I hadn't noticed at first and discovered when I couldn't pry the two
> freed-halves apart.
>
> After finally getting the steering assembly off, and removing the
> stainless cap that the rudder attaches to in the helm (which came off
> almost without the need for a wrench), I could see that the rudder post is
> in fact hollow (sides are about 1/4" thick) and inside is filled with
> foam. Because the rudder post was bent, the rudder did not come out very
> easily. I had to pound on it with a rubber mallet (for about 20 minutes)
> pour in penetrating oil, while my buddy turned the rudder manually in the
> water. After it was unseized, we pulled the rudder post out of the bottom
> of the boat and did the best we could to control the rudders ascent. Once
> the rudder post is all the way out, it becomes very evident that its
> positively bouyant, and how tricky it is to control even with two bodies
> holding it.
>
> After it was out of the water, we could assess the damage. The rudder
> post was bent about 3" off center over the 32" it sticks out (not too bad)
> and the fiberglass around the upper portion of the post as cracked. I
> took it to a local metal fabrication shop in Honolulu, and they
> straightened it back out no problem using a 120,000lb press (took about 40
> minutes and $80). Next is taking it to a glass-guy who can patch the
> crack and resurface the fiberglass. Paint it and pop it back in.
>
> Jon Whitney
> "Eye Whitness"
> 1979, Hull 54
> Honolulu
>
>
>
>
>
> -----Original Message-----
> From: listserve-request at catalina38.org
> To: listserve at catalina38.org
> Sent: Sun, Apr 3, 2011 7:28 pm
> Subject: Listserve Digest, Vol 7, Issue 229
>
>
> Send Listserve mailing list submissions to
> listserve at catalina38.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> or, via email, send a message with subject or body 'help' to
> listserve-request at catalina38.org
>
> You can reach the person managing the list at
> listserve-owner at catalina38.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Listserve digest..."
>
>
> Today's Topics:
>
> 1. Rudder Drop Woes (david at dlrfilms.com)
> 2. Re: crossing oceans (Larry Malmberg)
> 3. Re: Rudder Drop Woes (Steve Smolinske)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 3 Apr 2011 18:32:53 -0700
> From: david at dlrfilms.com
> To: "Catalina 38 Listserve" <listserve at catalina38.org>
> Subject: [C38] Rudder Drop Woes
> Message-ID:
> <ad3f56dfaf3f1474f58727e97a5b5cab.squirrel at webmail.dlrfilms.com>
> Content-Type: text/plain;charset=iso-8859-1
>
> Had a friend out today to help drop the rudder, and it would have happened
> except we couldn't get the under the deck tiller from the old wheel off
> the damn rudder post!
>
> Amazingly, the four bolts camping the thing together around the post
> backed out with out too much trouble, but the big drift pin wouldn't
> budge.
>
> We tried heat, PB blaster, brute force, and cunning mechanical advantage
> and only the slightest seem opened up between the shaft and the tiller.
>
> I am *discouraged*.
>
> Any helpful thoughts before I cut the damn thing off with an angle
> grinder?
>
> Thanks!
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 3 Apr 2011 18:57:43 -0700
> From: Larry Malmberg <larrypi at live.com>
> To: "'Rod and Patti Headlee'" <ja38 at earthlink.net>, "'Catalina 38
> Listserve'" <listserve at catalina38.org>
> Subject: Re: [C38] crossing oceans
> Message-ID: <SNT128-DS190051AE1114A7DC35A5C1CEA30 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Rod, how did the Katadyn 40e work for you???
>
>
>
>
>
>
> Best regards,
>
> Larry Malmberg
>
> Larry Malmberg Investigations
> 7231 Boulder Avenue Suite 507
> Highland, CA 92346 PI 15211
> Telephone 909-208-1847
> FAX 909-991-7568
>
> E Mail Larrypi at live.com
>
>
>
> Civil and Criminal, Surveillance, Internal Investigations.
> ?
> Life is short, Break the rules, Forgive quickly, Kiss slowly, Love truly,
> Laugh uncontrollably, And never regret anything that made you smile..
> ?
> "The American Indians found out what happens when? you don't control
> immigration"
>
>
> "Life is not a journey to the grave with the intention of arriving safely
> in
> a pretty and well preserved body, but rather to skid in broadside,
> thoroughly used up, totally worn out, and loudly proclaiming; WOW-- What a
> Ride!"
>
> CONFIDENTIALITY NOTICE: This electronic message, including any
> attachments,
> is for the sole use of the intended recipient(s) and may contain
> confidential and privileged information. Any unauthorized review, copying,
> use, disclosure or distribution of any parts of the contents of this
> message/information is prohibited by federal law. Attempts to intercept
> this
> message are in violation of Title 18 USC 2511(1) of the Electronic
> Communications Privacy Act (ECPA), which subjects the interceptor to
> fines,
> imprisonment and/or civil damages. If you are not the intended recipient,
> please contact the sender by reply e-mail and destroy all copies of the
> original message.
> ?
>
> -----Original Message-----
> From: listserve-bounces at catalina38.org
> [mailto:listserve-bounces at catalina38.org] On Behalf Of Rod and Patti
> Headlee
> Sent: Sunday, April 03, 2011 4:17 PM
> To: Catalina 38 Listserve
> Subject: Re: [C38] crossing oceans
>
> Hi All,
> I guess no one told us not to cross an ocean in the C-38. They are a bit
> wet
> at the helm seat but we were tiller steered with a monitor windvane. I
> could
> steer from the forward end of the cockpit and not get wet. We had JA in
> several gales before my wetaher forecasting got better and she did us fine
> in 50 kt winds and 25 foot seas. One night we turned into the wind and
> forereached under doulble reefed main and the next night we let her run
> and
> surf the waves with the monitor steering.
>
> We added a 40 gal fuel tank behind the engine so we carried 60 gal diesel
> total, we used 26 gal charging batteries on a 26 day run to Hiva Oa from
> Mazatlan. We had also installed an extra 18 gal water tank under the
> starboard setee and we carried 48 gal + 18 more in jerry jugs in the
> quarter
> berth. We also installed a Katadyn 40e, Air X, wind gen and a 55 watt
> solar
> panel. We had a Avon 4 man life raft, a Achilles dinghy and a ditch bag
> stuffed in the quarter berth too. She was well overloaded and still sailed
> well. We never got stern popped, we had several waves land in the
> mainsail
> pocket so we got a loose footed mainsail built for her. The cockpit drains
> are fine for offshore, a bit of wayer creeps in if you are motoring in a
> large stern swell. We filled the T of the cockpit with jerry jugs for
> stove
> fule, diesel and gas for the dinghy. The run from Boar Bora to Am Samoa
> was
> 35 kts 11-15 foot seas and the C-38 loved it.
>
> rod
>
>
> -----Original Message-----
>>From: Don Strong <drstrong at ucdavis.edu>
>>Sent: Apr 3, 2011 4:20 AM
>>To: Catalina 38 Listserve <listserve at catalina38.org>
>>Subject: Re: [C38] crossing oceans
>>
>>John:
>> a tyro is a beginner. Someone who knows only the rudiments. I'm no
>>expert. My feeling that C38's aren't a good choice for crossing oceans
>>is the advice of the surveyor who did my boat at purchase. The C38
>>features that to his mind said "choose another boat if you want to
>>cross oceans" were the lack of stern buoyancy ---part and parcel of an
>>IOR
>>boat--- combined with the poor cockpit drainage, combined with the huge
>>passageway allowing water from pooping into the cockpit. The second two
>>can be fixed. But, as I said, I'm no expert. What do others feel about
> this?
>>Don
>>
>>On 4/2/11 7:20 PM, John Felkins wrote:
>>> Sorry, but what's a "tyro?" Also, why don't you think the C38 is a good
> passage maker?
>>>
>>> On Apr 2, 2011, at 11:00 AM, listserve-request at catalina38.org wrote:
>>>
>>>> Send Listserve mailing list submissions to
>>>> listserve at catalina38.org
>>>>
>>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>>>> or, via email, send a message with subject or body 'help' to
>>>> listserve-request at catalina38.org
>>>>
>>>> You can reach the person managing the list at
>>>> listserve-owner at catalina38.org
>>>>
>>>> When replying, please edit your Subject line so it is more specific
>>>> than "Re: Contents of Listserve digest..."
>>>>
>>>>
>>>> Today's Topics:
>>>>
>>>> 1. Different builds? (John Felkins)
>>>> 2. Re: Different builds? (Harry Powell)
>>>> 3. Re: Different builds? (Don Strong)
>>>>
>>>>
>>>> --------------------------------------------------------------------
>>>> --
>>>>
>>>> Message: 1
>>>> Date: Fri, 1 Apr 2011 13:28:56 -0500
>>>> From: John Felkins<jrfelkins at gmail.com>
>>>> To: "listserve at catalina38.org"<listserve at catalina38.org>
>>>> Subject: [C38] Different builds?
>>>> Message-ID:<057FF911-B3CA-44E8-BBB6-78A0D2C62B73 at gmail.com>
>>>> Content-Type: text/plain; charset=us-ascii
>>>>
>>>>
>>>> I'm a Cal38 admirer, not an owner (yet). I'm wondering if there are
> years of manufacture that are more desirable than others? I like the boat
> for it's pedigree, lines, size, price and the Pardeys recommendation. Now
> I'm starting to look more closely. Thank for any feedback!
>>>>
>>>> Smooth sailing,
>>>>
>>>> John
>>>>
>>>>
>>>> ------------------------------
>>>>
>>>> Message: 2
>>>> Date: Sat, 02 Apr 2011 15:38:26 +0000 (GMT)
>>>> From: Harry Powell<harrypowell at mac.com>
>>>> To: Catalina 38 Listserve<listserve at catalina38.org>
>>>> Cc: jrfelkins at gmail.com
>>>> Subject: Re: [C38] Different builds?
>>>> Message-ID:<acc74510-842a-4f24-ab9d-cd641fdac383 at me.com>
>>>> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
>>>>
>>>> My 1984 is just about the perfect year, also for sale in San Diego at
> the moment.
>>>>
>>>> Kidding aside, when I was looking I looked at the systems; electrical
> for upgraded wiring and clean runs, etc. And electroics; original?
> working?
> Also engine especially routine maintenance and exhaust system. The boats
> are
> very similar from year to year and the later years have a few "upgrades"
> but
> are quite simply not as old and have seen less wear and tear.
>>>>
>>>> Look at inventory as sails are expensive. Check the engine log as
> rebuilds are expensive.
>>>>
>>>> Cheers!?
>>>> Harry?
>>>> Sum Fun,hull #258
>>>>
>>>>
>>>>
>>>>
>>>> On Apr 01, 2011, at 11:28 AM, John Felkins<jrfelkins at gmail.com>
>>>> wrote:
>>>>
>>>>
>>>> I'm a Cal38 admirer, not an owner (yet). I'm wondering if there are
> years of manufacture that are more desirable than others? I like the boat
> for it's pedigree, lines, size, price and the Pardeys recommendation. Now
> I'm starting to look more closely. Thank for any feedback!
>>>>
>>>> Smooth sailing,
>>>>
>>>> John
>>>> _______________________________________________
>>>> Listserve mailing list
>>>> Listserve at catalina38.org
>>>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>>>> -------------- next part -------------- An HTML attachment was
>>>> scrubbed...
>>>> URL:<http://catalina38.org/pipermail/listserve_catalina38.org/attach
>>>> ments/20110402/148f51b6/attachment-0001.html>
>>>>
>>>> ------------------------------
>>>>
>>>> Message: 3
>>>> Date: Sat, 02 Apr 2011 08:44:33 -0700
>>>> From: Don Strong<drstrong at ucdavis.edu>
>>>> To: Catalina 38 Listserve<listserve at catalina38.org>
>>>> Subject: Re: [C38] Different builds?
>>>> Message-ID:<4D974461.9090405 at ucdavis.edu>
>>>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>>>
>>>> Dear John:
>>>> Discreet Charm is C38 number 50 built in 1980. We all love the
>>>> way our boats sail, the large interior of C38s, and the superior
>>>> craftsmanship. So I will tell you what I don't like about them.
>>>> Common to all IOR boats is the pinched stern, which means no space
>>>> aft. The C36 does not have a pinched stern. I also dislike the very
>>>> restricted space in the engine room. To be able to view amply and
>>>> work around the engine of a sailboat is a real plus that the C38
>>>> doesn't have. Finally, the early boats like mine have small fuel
>>>> tanks, 20 gals, and replacement with a larger fuel tank is a lot of
>>>> work
> and expense.
>>>> These are the only minuses that I have encountered in 8 years
>>>> of ownership. I will say that if I had the choice to repurchase my
>>>> boat I would. I would not buy a C36 because I think they look like
>>>> pigs, and appearance is a big part of the hedonic pleasure one takes
> from a yacht.
>>>> I wouldn't buy an Erickson to get the great engine access because
>>>> they don't sail nearly as well as a C38. The fuel limitation can be
>>>> worked around, it isn't a problem unless you were to want to cross
>>>> oceans. I don't think the C38 is a great ocean crossing boat, but
>>>> I'm pretty much a tyro about ocean crossing.
>>>> I'll bet others have different opinions. I look forward to the
>>>> other responses to your question.
>>>> Regards, Don
>>>>
>>>> PS. Renovation and refitting is really expensive. Buy a boat that
>>>> has recently been renovated and refitted.
>>>>
>>>> On 4/1/11 11:28 AM, John Felkins wrote:
>>>>> I'm a Cal38 admirer, not an owner (yet). I'm wondering if there are
> years of manufacture that are more desirable than others? I like the boat
> for it's pedigree, lines, size, price and the Pardeys recommendation. Now
> I'm starting to look more closely. Thank for any feedback!
>>>>>
>>>>> Smooth sailing,
>>>>>
>>>>> John
>>>>> _______________________________________________
>>>>> Listserve mailing list
>>>>> Listserve at catalina38.org
>>>>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>>>> --
>>>> Donald R. Strong
>>>> C38 Discreet Charm
>>>> Emerycove, San Francisco Bay
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------
>>>>
>>>> _______________________________________________
>>>> Listserve mailing list
>>>> Listserve at catalina38.org
>>>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>>>>
>>>>
>>>> End of Listserve Digest, Vol 7, Issue 224
>>>> *****************************************
>>> _______________________________________________
>>> Listserve mailing list
>>> Listserve at catalina38.org
>>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>>
>>--
>>Donald R. Strong
>>Professor
>>Dept. of Evolution and Ecology
>>University of California, Davis 95616
>>
>>
>>_______________________________________________
>>Listserve mailing list
>>Listserve at catalina38.org
>>http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sun, 3 Apr 2011 22:26:31 -0700
> From: "Steve Smolinske" <SSmolinske at rainierrubber.com>
> To: "Catalina 38 Listserve" <listserve at catalina38.org>
> Subject: Re: [C38] Rudder Drop Woes
> Message-ID: <392501BCC93AAC4EA94D28D8DB1599226928C7 at sockeye.4M.local>
> Content-Type: text/plain; charset="iso-8859-1"
>
> David,
>
> Just dropped mine and had a similiar problem with one of the four bolts
> clamping
> the unit to the post. We ended up using socket extensions to get the
> wrench so
> that a second person could put a pipe on it from within the quarter berth.
> I
> layed in place and held the socket on the head of the bolt and supported
> the
> extensions so that the other crew member could reef on the damn thing. It
> took
> a whole lot of grunting and groaning.
>
> Aluminium heats and expands faster than the stainless bolt, you might try
> heating and then applying more WD40 or PB Blaster and waiting a few hours.
> tap
> the head of the bolt after heating and spraying the WD to allow the WD40
> to
> penetrate into the threads Im assuming you also removed the two smaller
> bolts
> at the outer edge of the wheel in addition to the four large ones in the
> center.
>
>
> When you get it out let me know what your post looks like, I thought they
> were
> solid posts, I was surprised to find that ours looked to be about Schedule
> 40
> pipe.
>
> Steve
> #312 Peregrine
> Seattle
>
> ________________________________
>
> From: listserve-bounces at catalina38.org on behalf of david at dlrfilms.com
> Sent: Sun 4/3/2011 6:32 PM
> To: Catalina 38 Listserve
> Subject: [C38] Rudder Drop Woes
>
>
>
> Had a friend out today to help drop the rudder, and it would have happened
> except we couldn't get the under the deck tiller from the old wheel off
> the damn rudder post!
>
> Amazingly, the four bolts camping the thing together around the post
> backed out with out too much trouble, but the big drift pin wouldn't
> budge.
>
> We tried heat, PB blaster, brute force, and cunning mechanical advantage
> and only the slightest seem opened up between the shaft and the tiller.
>
> I am *discouraged*.
>
> Any helpful thoughts before I cut the damn thing off with an angle
> grinder?
>
> Thanks!
>
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: not available
> Type: application/ms-tnef
> Size: 5411 bytes
> Desc: not available
> URL:
> <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20110403/e544e834/attachment.bin>
>
> ------------------------------
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>
> End of Listserve Digest, Vol 7, Issue 229
> *****************************************
>
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
More information about the Listserve
mailing list