[C38] Lockers and Batteries

Max Soto maxsoto at gmail.com
Thu May 19 23:28:49 EDT 2011


I've been checking out that monitor on the web... It has some really nice features.....

Max 

Sent from my iPod

On May 19, 2011, at 10:14, "Larry Malmberg" <Larrypi at roadrunner.com> wrote:

> Will do Max, am putting in the sensors on Wednesday next, it also has a monitor for the bilge pump and records the number of times the pump has come on.  Guess that's a good thing to monitor when one is off the boat you know how much water is coming into the bilge so you can adjust your packing glands.
>  
> Larry Malmberg
> Team Hassle
> 
> 
> 
> 
> From: listserve-bounces at catalina38.org [mailto:listserve-bounces at catalina38.org] On Behalf Of Max Soto
> Sent: Thursday, May 19, 2011 9:08 AM
> To: Catalina 38 Listserve
> Subject: Re: [C38] Lockers and  Batteries
> 
> please let us know how those tank monitor works for you!
> 
> 2011/5/19 Steve Smolinske <SSmolinske at rainierrubber.com>
> Larry,  what type of water maker did you go with? And where are you locating your through hulls?   We stole the one from the bow for  intake and Im still working on  what  Im going to do for discharge.      
> 
>  
> 
> Steve
> 
>  
> 
> From: listserve-bounces at catalina38.org [mailto:listserve-bounces at catalina38.org] On Behalf Of Larry Malmberg
> Sent: Thursday, May 19, 2011 8:42 AM
> To: 'Catalina 38 Listserve'
> Subject: [C38] Lockers and Batteries
> 
>  
> 
> Bill, during the rehab on Hassle all of this was done by the mechanic/electrician, we had extensive work done including Pro Sine charger/inverter which now will power all our AC outlets when shore power is off, nice thing about this is, if there is no load the inverter shuts it's self off so there is no draw at all.  New AC/DC panel, house batteries, four, relocated, new engine panel that actually works but doesn't have and oil pressure gauge which we are installing, I hate buzzers. Sat phone wired into a docking station, new Nexus instruments which are awesome.  Garmin HD Radar which integrates with our chart plotter an all the instruments integrate as well and of course all are tied into a laptop with Nexus Racing Software.  We are installing a water maker next week, new mainsail and jib not to mention the SSB and all the accruements for it.  LOL  Just more boat bucks in action here.  LOL  Ooops I forgot the Blue Seas tank monitors too.
> 
>  
> 
> 
> 
> 
> 
> Best regards,
> 
> Larry Malmberg
> 
> Larry Malmberg Investigations
> 7231 Boulder Avenue Suite 507
> Highland, CA 92346 PI 15211
> Telephone  909-208-1847
> FAX           909-991-7568
> 
> E Mail  Larrypi at roadrunner.com
> 
> 
> 
> Civil and Criminal, Surveillance, Internal Investigations.
>  
> Life is short, Break the rules, Forgive quickly, Kiss slowly, Love truly, Laugh uncontrollably, And never regret anything that made you smile..
>  
> "The American Indians found out what happens when  you don't control
> immigration"
> 
> 
> "Life is not a journey to the grave with the intention of arriving safely in
> a pretty and well preserved body, but rather to skid in broadside,
> thoroughly used up, totally worn out, and loudly proclaiming; WOW-- What a
> Ride!"
> 
> CONFIDENTIALITY NOTICE: This electronic message, including any attachments,
> is for the sole use of the intended recipient(s) and may contain
> confidential and privileged information. Any unauthorized review, copying,
> use, disclosure or distribution of any parts of the contents of this
> message/information is prohibited by federal law. Attempts to intercept this
> message are in violation of Title 18 USC 2511(1) of the Electronic
> Communications Privacy Act (ECPA), which subjects the interceptor to fines,
> imprisonment and/or civil damages. If you are not the intended recipient,
> please contact the sender by reply e-mail and destroy all copies of the
> original message.
>  
> 
>  
> 
>  
> 
> From: listserve-bounces at catalina38.org [mailto:listserve-bounces at catalina38.org] On Behalf Of William Knowles
> Sent: Thursday, May 19, 2011 8:32 AM
> To: Catalina 38 Listserve
> Subject: Re: [C38] Mysterious stuffing box behavior
> 
> I have the same locker also. I have a little door from behind the ice chest for trash. How hard is it to put the starter battery there? Did you wire it through the main panel?
> 
>  
> 
> Bill
> 
> On Thu, May 19, 2011 at 11:12 AM, Max Soto <maxsoto at gmail.com> wrote:
> 
> Larry,
> 
>  
> 
>  I have exactly the same locker as Hassle.
> 
>  
> 
> Max
> 
>  
> 
> 2011/5/19 Larry Malmberg <Larrypi at roadrunner.com>
> 
> I'm confused too Max.  Our port locker in the cockpit (sail locker?) is open all the way to the hull except for a step where the start battery is located, the step has a shelf for storage where we keep extra oil and coolant, there is a large access to the engine compartment there as well, kind of T shaped.
> 
>  
> 
> 
> Larry Malmberg
> 
> Team Hassle
> 
> 
>  
> 
>  
> 
>  
> 
> From: listserve-bounces at catalina38.org [mailto:listserve-bounces at catalina38.org] On Behalf Of Max Soto
> Sent: Thursday, May 19, 2011 7:52 AM
> To: tdtron at earthlink.net; Catalina 38 Listserve
> 
> 
> Subject: Re: [C38] Mysterious stuffing box behavior
> 
>  
> 
> I don't know if it is just me, but this locker is totally different than mine... I remember seeing this pics years ago, but still today , I can't figure it out, and my only explanation is that the modification was very big and I didn't get that, or that  (this is getting common!) there are two different kind of lockers. Mine goes all the way to the hull, and has a liner with no  anti skid pattern..
> 
> How about other boats??????
> 
> I need to install a generator behind the engine, so the room I can make for myself, the better!
> 
>  
> 
> Regards,
> 
>  
> 
> Max 
> 
> 2011/6/18 tdtron at earthlink.net <tdtron at earthlink.net>
> 
> Dan,
> 
>  
> 
> While mentioning the sail locker cutout, you reminded me that I came across a couple of old photos of my locker cutout which I have attached.  The holes on the engine side of the locker were left over from the previous owner's hot water heater which I moved to the engine aft of the transmission.  That location was not possible before the sail locker modification.
> 
>  
> 
> The cutout is supported by angle aluminum bolted with countersunk #10 stainless bolts and nylock nuts.  The four screw heads in the first photo are holding my pressure water pump up side down between the hull and sail locker bottom.  We found that location to be a very quiet place for the pump and after the sail locker cutout modification, that location also became easy to service, another previously wasted unaccessible area.
> 
>  
> 
> On the sail locker cutout, I did add a vertical brace between the forward inside corner of the cutout and the hull.  I bedded a piece of pressure treated wood to the hull and made a support of aluminum angle connected to the perimeter aluminum angle which made the floor of the sail locker very stiff and strong.
> 
>  
> 
> Of all of the modifications I made to my 38, I think this was the most practical and best.
> 
>  
> 
> Tom Troncalli
> 
>  
> 
>  
> 
>  
> 
>  
> 
> ----- Original Message -----
> 
> From:
> 
> To: Catalina 38 Listserve
> 
> Sent: 5/18/2011 12:40:01 PM
> 
> Subject: Re: [C38] Mysterious stuffing box behavior
> 
>  
> 
> Marci, We bought our boat in Rhode Island and last year did the opposite trip you are doing. We brought it to the Chesapeake Bay. We Had a situation that may be close to yours.
> 
> We had 5 total crew and was motor sailing hard in Long Island Sound to try to get to the East River to catch the tide right. We heard water splashing around and the quarter berth was getting wet (we have an opening there to get to the back of the engine, not sure all Catalina's have it). There was a lot of water under the engine and the spinning shaft was splashing it around. When the shaft wasn't spinning there was no splashing.
> 
> Before starting our adventure I got a lot of information from the C38 website, most importantly the leaking stuffing box on the rudder post. Below the front of the engine there is a drain hole that allows water to drain from under the engine to the bilge. Ours was clogged up and allowed the build up of water under the engine and the shaft to splash it around. When running hard and even sailing fast the rudder post will let in a lot of water because the stern is squatted down.
> 
> Check under the front of the engine and make sure that hole is clear. I think you will find that to be your problem as well as a rudder post leak.
> 
> I still have to fix mine. I'm going to cut out the sail locker bottom as suggested on the C38 website to gain access to the rudder post.
> 
> Dan #108
> 
> 
> ----- Original Message -----
> From: "Max Soto" <maxsoto at gmail.com>
> To: "Catalina 38 Listserve" <listserve at catalina38.org>
> Sent: Wednesday, May 18, 2011 11:35:51 AM
> Subject: Re: [C38] Mysterious stuffing box behavior
> 
> Marci,
> 
>  I guess that the shaft was spinning while sailing with the transmission in neutral. I'll check the packing gland and also check for movement of the stuffing box while running with the engine, it should denote problems like the ones you just mentioned...
> 
>  
> 
> Hope this helps.. 
> 
>  
> 
> Max Soto
> C38 #198 ESTANCIA
> 
> Puntarenas, Costa Rica
> 
>  
> 
> 2011/5/18 Marci Brown <mb at seafor.us>
> 
> A troubling stuffing box situation began last week (and continues): We ran the engine reasonably hard for about 4 hours when doing the NYC East River trek to Long Island Sound. I was in the galley when Keith raised the sails and cut the engine (leaving transmission in neutral). Immediately I heard water pouring into the boat from the stuffing box area. I shouted for Keith to throw the transmission into reverse. No more water! Whew! Water quickly exited the boat via bilge pump - with the exception of 10 gallons sitting under the engine that I had to pump out by hand. Diagnostic guesstimate #1: New zincs on the prop shaft causing wobble that is stressing the 2-year old flax packing gland... right? The cutlass bearing is fine. Other thoughts: Folding prop has inherent balance issues, engine/transmission/prop shaft alignment fine tuning necessary, packing glands wear out quickly under stress?? Would anyone like to tackle this one?
> 
>  
> 
> Marci J. Brown
> 
> PO Box 520549, Winthrop, MA 02152 USA
> 
> Ph: 757-515-3151 | Email: mb at seafor.us
> 
>  
> 
>  
> 
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> 
> 
> 
> 
> --
> 
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> 
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> 
> 
> 
> 
> -- 
> Max Soto
> C38 #198 ESTANCIA
> Puntarenas, Costa Rica
> 
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> 
> 
> 
> 
> -- 
> Max Soto
> C38 #198 ESTANCIA
> Puntarenas, Costa Rica
> 
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> 
> 
> 
> 
> -- 
> W H Knowles
> 
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1375 / Virus Database: 1509/3647 - Release Date: 05/19/11
> 
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> 
> 
> 
> 
> -- 
> Max Soto
> C38 #198 ESTANCIA
> Puntarenas, Costa Rica
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20110519/eb00980d/attachment-0001.htm>


More information about the Listserve mailing list