[C38] Hurth Transmission Oil Level

[Mark Lewis]

Mine is a ring near the top of the stick, and the manual says to not screw
it in when taking a reading.

On Fri, Jun 8, 2012 at 4:48 PM, Rob Cornelsen <robcornelsen at yahoo.com>wrote:

> Can anyone explain how to read the dip stick on the ZF Hurth reduction
> gear - There is a ring around the bottom and a small hole drilled about
> three inches above it near the threaded cap.
>
> Thanks
>
> Rob
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20120613/4fa6ddfe/attachment-0001.htm>