[C38] Bob Stay

[Steve Smolinske]

So basically what you want is an attachment on the bow to tie to your  bowsprit/karver  roller  in order  to keep the tension on the halyard?   Why not use a pad eye  low on the bow below the anchor roller with wire and a turnbuckle up to the bottom of the sprit.   If  all you're doing  in essence is tacking the spinnaker to the roller which is attached  to the sprit and then carrying the load to the hull, in order to keep tension on the halyard, you only need to worry about a load somewhere in the 2500-3500 pound range.   Seems like a wichard pad eye with two 5/16 bolts and a backing plate will do what you're looking for.   

 

From: listserve-bounces at catalina38.org [mailto:listserve-bounces at catalina38.org] On Behalf Of Joseph Launie
Sent: Thursday, November 29, 2012 12:15 AM
To: listserve at catalina38.org
Subject: Re: [C38] Bob Stay

 

Steve,
    We are many thousands of dollars beyond your fix. We have a Seldon adjustable sprit which projects out 42 inches past the head stay. (PHRF hit us 15 seconds fo our new 19 foot J. ) We have a 1/2 oz assy chute made for the 19 foot J which is fast in light air.The Karver furler sits on the end of the Seldon. The karver needs a very tight halyard so pressure upward on the sprit thus the bob stay. Got a drawing from a J-120 from Sailing Anarchy fix-it thread.  So here we are. Joe

On 11/28/2012 10:26 PM, Steve Smolinske wrote:

	Joe, 

	 

	Have you thought about removing your current bow roller and having what you want added to it?  I drew up some plans to add a 13" extension in order to get the tack for the asym out past the bow pulpit, but decided to wait and see if some of the other tweaks I did will solve the issue first.   You might be able to add 13" of ¼ stainless reinforced on both sides and then tied to the hull with a wire tie rod.   Ill try to send a scan of my drawing in the next few days, (Going in for elbow surgery tomorrow and not sure if ill be to work on Friday or not) but will forward as soon as I can.  The Karver can mount to your bow sprit too cant it?  

	 

	Steve

	#312 Peregrine

	Seattle

	 

	From: listserve-bounces at catalina38.org [mailto:listserve-bounces at catalina38.org] On Behalf Of Joseph Launie
	Sent: Wednesday, November 28, 2012 10:13 PM
	To: Catalina 38 Listserve
	Subject: [C38] Bob Stay

	 

	Hi,
	    I am going to put a bob stay on Macavity to handle my Kaver top down chute furler. Does anyone know where I can get a bracket built for the bow  of the boat? I want it to be v shaped stainless following the shape of the hull with an eye to swage the bob stay to. I would also want backing plates for the inside of the hull. It needs to be strong. The bob stay itself will be 11 mm spectra with a cover rated at 19,000 pounds.  SAnta Barbara is a good place for olives but not stainless. Joe

	
	
	
	

	_______________________________________________
	Listserve mailing list
	Listserve at catalina38.org
	http://catalina38.org/mailman/listinfo/listserve_catalina38.org

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20121129/08eb541c/attachment-0001.htm>