[C38] 3 bladed folding prop
Joseph Launie
jlaunie at cox.net
Mon May 27 20:44:19 EDT 2013
Steve,
i went to the 3 blade Max Prop from the two blade. Much better - no
vibration - no trouble. The performance is noticably better at slow
speeds coming in to the slip.
On 5/27/2013 5:23 PM, S Orton wrote:
> Has anybody tried a 3 bladed folding prop? Slipstream makes a geared
> 3 bladed folding prop which should have less drag and be more
> efficient than a feathering prop. I've got to go to a three blades to
> reduce vibration and to make my cutlass bearings last longer-now a
> geared folding prop is installed. I typically replace the cutlass
> every time I haul the boat. Phil Gay tells me he hasn't replaced his
> cutlass since replacing his prop with a Max Prop and that was over ten
> years ago. What kind of life are the members experiencing? In the
> past, I removed the shaft took to a machine shop to inspect for
> trueness- the machinist did face the flange while mounted on the shaft
> less than .002", which didn't help. I have also replaced engine
> mounts. All alignment procedures were done on the hard. The only
> thing left is to do is an alignment check in the water. Or again
> maybe its the 2 bladed prop!
> Comments please, Steve O (Santa Susanna,304)
>
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20130527/7965c518/attachment-0001.htm>
More information about the Listserve
mailing list