[C38] Wiring the Mast

[Joseph Launie]

pull the mast and rewire all your lights etc. while you  have it down- 
Joe/Macavity
On 6/17/2013 12:14 AM, littlebreeze at comcast.net wrote:
> Happy Fathers Day to the group.
>
> I was thinking of installing a wind speed indicator at the top of the 
> mast.  However when I looked into accessing the existing wiring and 
> PVC conduit, it looks to be an impossible task without pulling the 
> mast.  Has anyone overcome this issue without pulling the mast?  The 
> only way I can come up with is to cut a 3.5 inch hole in the starboard 
> side of the mast approximately 6" from the bottom of the mast, and 
> then, after making the appropriate connections, affix  a cover plate 
> to the access hole.  Will this weaken the mast beyond use?  Should I 
> just pull the mast?
>
> Kerry Grimes
> Little Breeze 139
> San Francisco
>
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20130617/be4a383e/attachment-0001.htm>