[C38] Mast Halyard
1derful at comcast.net
1derful at comcast.net
Tue Jun 25 08:37:36 EDT 2013
Thanks, I'll check it out.
Patrick
----- Original Message -----
From: "D McC" <cat38skip at yahoo.com>
To: "Catalina 38 Listserve" <listserve at catalina38.org>
Sent: Monday, June 24, 2013 9:00:33 PM
Subject: Re: [C38] Mast Halyard
There is a list of the original halyard lengths in the guides section of the website under Catalina 38 Tech Drawings, Mast Boom Rigging, Rigging Checklist 1 & 2.
<><><><><><><><><><><><><><><><><><><><><><><><><><><>
Common Sense is a rare gift from the Gods.
Most people have only technical training!
<><><><><><><><><><><><><><><><><><><><><><><><><><><>
The gods do not deduct from man's allotted span those hours spent in sailing.
<><><><><><><><><><><><><><><><><><><><><><><><><><><>
When in doubt, try the vice You haven't tried before!
From: "1derful at comcast.net" <1derful at comcast.net>
To: Catalina 38 Listserve <listserve at catalina38.org>
Sent: Monday, June 24, 2013 7:02 PM
Subject: Re: [C38] Mast Halyard
Brett,
I replaced the jib halyard. I assume the main is just a bit shorter but don't know the exact length.
Do you?
Patrick
From: "Brett" <bikahoga at aol.com>
To: "Catalina 38 Listserve" <listserve at catalina38.org>
Sent: Monday, June 24, 2013 9:24:09 AM
Subject: Re: [C38] Mast Halyard
The spin halyard was 135 ft so I would assume the jib halyard is about the same. I'm getting ready to replace that as well later this week but not using metal in the halyard.
Brett
On Jun 24, 2013, at 11:35 AM, 1derful at comcast.net wrote:
<blockquote>
What's the length?
I don't want to get it halfway up and run out of line?
Patrick
From: "Brett" < bikahoga at aol.com >
To: "Catalina 38 Listserve" < listserve at catalina38.org >
Sent: Monday, June 24, 2013 8:32:09 AM
Subject: Re: [C38] Mast Halyard
Yes. I got new spin and main halyard.
Thanks
Brett
On Jun 24, 2013, at 11:16 AM, 1derful at comcast.net wrote:
<blockquote>
I remember a posting recently of someone looking for the length.
Did you find it?
I replace my jib halyard yesterday...........spliced the old with new and a fortunately it came through.
Patrick
<blockquote>
_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
</blockquote>
_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
</blockquote>
_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
</blockquote>
_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20130625/8a266ae3/attachment-0001.htm>
More information about the Listserve
mailing list