[C38] Listserve has been quiet for some time

[Max soto]

We'll done Steve.. I'm curios about a couple of things....

What's that stainless thru hull on the stern with an elbow shape?

What modifications were made to the steering radial wheel??

Regards,

Max Soto A.
+506-8312-1367
Alajuela, Costa Rica

> On Nov 24, 2013, at 5:31 PM, "Steve Smolinske" <SSmolinske at rainierrubber.com> wrote:
> 
> Having noticed a lack of activity of late thought I would pass along a picture or two of some recent projects,  first I moved the gps antennas from under the coaming to the topside near the blower vents, nice location, out of the way and semi protected.   The garmin deck mounts are kind of flimsy so I used 4200 on the mount to deck, then on antenna to mount.  Nice and secure happy with the move.   Second is the autopilot install, Garmin hydraulic ram was too large to mount in any orientation, so they came up with the PYI jeffa drive, built a shelf for it and it barely fit, course computer is tucked away forward of the drive and to port, you can see the black cables running to it near the white bilge hose.  Lost a little bit of steering range for hard over due to the rudder arm, but as tradeoffs go it’s not a big problem (at least yet, sitting at the dock)  What has everyone else been up to?
>  
> Steve
> #312 Peregrine
> Seattle
> <IMG_7609.JPG>
> <IMG_7611.JPG>
> <IMG_7613.JPG>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20131213/c7510b05/attachment-0001.htm>