[C38] jib sheet fair lead blocks

Joseph Launie jlaunie at cox.net
Fri May 13 04:51:05 EDT 2016


harken BIG turning blocks - harken track and adjustable fairleads


On 5/9/2016 6:53 AM, Don Strong wrote:
> Dave: Port side, winch is to the right in the images. Lower life line 
> is pulled down because the gate is open. When gate closed the life 
> line is taught.
>
> Don
>
>
> On 5/2/16 3:11 PM, David Stoltz wrote:
>>
>> Don, did you go with the 60-13 3500 SWL 3,500 lbs? I wish there was a 
>> way to spread out the load a little on the on the aluminum rail, like 
>> maybe over 3 holes rather than just the one.
>>
>> On May 2, 2016, at 10:05 AM, Don Strong wrote:
>>
>>> David. I removed the foot blocks and now use Garhauer unibody blocks 
>>> on the aluminum rail placed at about the position of aft end of the 
>>> big house window to lead the jib sheet to the big winch. A huge 
>>> force on those 360 footblocks removed, they leaked. The bolts were 
>>> actually bent when I removed them, plugged the holes. Gave my foot 
>>> blocks to Max Soto. Sorry not to have a pic. Will get one soon.
>>> Don
>>>
>>> https://www.garhauerstore.com/blocks/unibody-blocks.html
>>>
>>> On 5/2/16 9:53 AM, David Stoltz wrote:
>>>> Hello,
>>>>
>>>> I'm thinking about mounting new blocks (see photo) just below the small rear winch mounted in the cockpit. They would use as a return for my headsail sheets. The sheet would come from the deck mounted adjustable block we all have, through this one and back to the winch. With a 155 headsail, I'm concerned about the fiberglass in this area being able to withstand the force under a full load. Any thoughts would be greatly appreciated.
>>>>
>>>> Thanks,
>>>>
>>>> David Stoltz
>>>> Andiamo
>>>> #297
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Listserve mailing list
>>>> Listserve at catalina38.org
>>>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>>>
>>>
>>> -- 
>>> Donald R. Strong
>>> Professor,
>>> Department of Evolution and Ecology
>>> and
>>> The Bodega Marine Laboratory,
>>> University of California, Davis,
>>> Davis CA
>>> 95616
>>> 530 752 7886
>>> _______________________________________________
>>> Listserve mailing list
>>> Listserve at catalina38.org <mailto:Listserve at catalina38.org>
>>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>>
>> David Stoltz
>> Executive Producer
>> 310.785.9100
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Listserve mailing list
>> Listserve at catalina38.org
>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>
> -- 
> Donald R. Strong
> Professor,
> Department of Evolution and Ecology
> and
> The Bodega Marine Laboratory,
> University of California, Davis,
> Davis CA
> 95616
> 530 752 7886
>
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20160513/cc783023/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: turningblockone.jpg
Type: image/jpeg
Size: 24015 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20160513/cc783023/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: turningblocktwo.jpg
Type: image/jpeg
Size: 37449 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20160513/cc783023/attachment-0003.jpg>


More information about the Listserve mailing list