[C38] Electrical wiring
Danny Haughey
djphawk at yahoo.com
Thu Jun 9 16:33:50 EDT 2016
Hi marc
I think if you can find a convenient place to locate them, a positive
and a negative terminal block is a really good alternative to running
all the way back to the panel 4 times. One nice 12 wire to feed the
blocks and then run 14 or 16 wire to the fixtures from there.
Danny
On 6/9/2016 4:24 PM, Steve Smolinske wrote:
>
> Marc,
>
> When I did it I ran back to the panel, I didn’t want splices anywhere
> along the line, I only want two ends to troubleshoot.
>
> *From:*Listserve [mailto:listserve-bounces at catalina38.org] *On Behalf
> Of *Pierre Patino
> *Sent:* Thursday, June 09, 2016 1:23 PM
> *To:* Catalina 38 Listserve
> *Subject:* Re: [C38] Electrical wiring
>
> The catalina38.org <http://catalina38.org> site has wiring diagrams
> showing that the port and starboard V-berth light fixtures have a
> common node astern by the galley.
>
> On Thu, Jun 9, 2016 at 8:18 AM, Pierre Patino <pierre.patino at gmail.com
> <mailto:pierre.patino at gmail.com>> wrote:
>
> Hello Marc
>
> It's nice to have the time to do this "fun" project.
>
> Any reason not to connect the LED strips in parallel with the already
> existing light fixtures? They are low-amperage. That's what I would do
> in my naivete.
>
> Cheers
>
> On Thu, Jun 9, 2016 at 7:39 AM, Marc-Andrea Klimaschewski
> <marcklim at outlook.com <mailto:marcklim at outlook.com>> wrote:
>
> Hi folks,
>
> I will start re-wiring Image soon and I wanted to get going in the
> V-berth. Currently there are two light fixtures in there and I
> would like to add two more LED strips. Is it best practice to run
> wires all the way from the fixtures in the V-berth to the panel or
> is it OK to use some means to distribute power from a place in the
> V-berth? I assume it is best to run wires all the way but I did
> not find convincing information anywhere on the internet.
>
> Thanks
>
> marc
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org <mailto:Listserve at catalina38.org>
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20160609/1dca0ba9/attachment-0001.htm>
More information about the Listserve
mailing list