[C38] Jib lead car positions

[Bob Porter]

MessageThe club cruise page is www.interclub.com and it explains all.  They have a wonderful photo contest that gives them great picture (on the page as well).

The dates are June 24th through the 28th.  Starts at Erie and ends at Point Abino. About 54 racers, 20+ cruisers and a great great time.  Barney from Erie used to do it but he's now bought a Melges 24?

Take care

Bob Porter
  ----- Original Message ----- 
  From: Duff, Russ (R.W.) 
  To: 'Catalina 38 Listserve' 
  Sent: Monday, March 27, 2006 3:40 PM
  Subject: Re: [C38] Jib lead car positions


  Hi Bob (again),
  When is the race/cruise?


  Sincerely, 

  Russ Duff
  Electrical Applications Engineer
  Climate Control 

  RDUFF at VISTEON.COM 

  Visteon Climate Control 
  METVIS 
  D-64 
  45000 Helm Street 
  Plymouth, MI  48170 

  PHONE: 734-416-1511


  -----Original Message-----
  From: Listserve-bounces at catalina38.org [mailto:Listserve-bounces at catalina38.org] On Behalf Of Bob Porter
  Sent: Monday, March 27, 2006 3:27 PM
  To: Catalina 38 Listserve
  Subject: Re: [C38] Jib lead car positions


  Hi Russ;

  Come join me in the Lake Erie Inter-club Cruise.  It is one of the greatest racing events on the Great Lakes.  Basically the Eastern end of the Lake - Five middle distance races, four port to port.

  I set my leads based on the wind.  Before the start I go to weather and adjust the lead so all the telltales lift at the same time. Forward if the lowers lift first and vice versa.  Do this for each side as the wind frequently turns (shear) as you move higher off the water.  I really sheet the genoa in close (at least in rather flat seas) as Hiawatha loves to point.

  Bob Porter
    ----- Original Message ----- 
    From: Duff, Russ (R.W.) 
    To: C38-List (Listserve at catalina38.org) 
    Sent: Monday, March 27, 2006 1:04 PM
    Subject: [C38] Jib lead car positions


    You've probably seen my previous posts about getting into racing this year (LOOK OUT!).  Anyway, what I would like to know is where should I set the cars for the jib sheets in different wind conditions/sailing angles?  I know where I usually set them, but I don't know how correct they are for getting optimum speed.  I have standard dacron sails, and my jib is a 150 roller furling head sail with the protective UV cover sewn on. 

    Thanks in advance for all of the good advice. 

    Sincerely, 
    Russ Duff 
    Catalina 38, Hull #112
    "AVANTURA"
    Lake Erie
    Grosse Ile, Michigan
    RDUFF AT VISTEON DOT COM 








----------------------------------------------------------------------------


    _______________________________________________
    Listserve mailing list
    Listserve at catalina38.org
    http://catalina38.org/mailman/listinfo/listserve_catalina38.org



------------------------------------------------------------------------------


  _______________________________________________
  Listserve mailing list
  Listserve at catalina38.org
  http://catalina38.org/mailman/listinfo/listserve_catalina38.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20060327/0f6d5d8e/attachment-0001.htm>