[C38] re catalina 38 noise in mast

[Patrick Harpole]

thanks......Patrick
  ----- Original Message ----- 
  From: Rich West 
  To: Catalina 38 Listserve 
  Sent: Tuesday, May 02, 2006 9:41 AM
  Subject: Re: [C38] re catalina 38 noise in mast


  I had the PVC conduit come loose also.  I was able to rivet it back into place without taking out the mast.  On my boat, there is one set of rivet holes running up the mast and next to each rivet hole, there is another small hole.  To re-secure the conduit, I put a hook shaped wire in the other hole, pulled the conduit into place with the hook and put in a new rivet.  It took about an hour to replace all the rivets.

  The other problem was that someone ran the wire for the radar out of the conduit.  It was a lot of work to re-route that wire but it was all done with the mast in place.

  Rich West, Legacy, #360
    -----Original Message-----
    From: Listserve-bounces at catalina38.org [mailto:Listserve-bounces at catalina38.org]On Behalf Of RICHARD KILROY
    Sent: Monday, May 01, 2006 2:48 PM
    To: listserve at catalina38.org
    Subject: [C38] re catalina 38 noise in mast


    I agree with Charles, I had my conduit break loose during a very ruff trip to Bermuda in 2000. The problem is to fix it the mast must come out

    Dick Kilroy

    Catalina 38 Dashaway


------------------------------------------------------------------------------


  _______________________________________________
  Listserve mailing list
  Listserve at catalina38.org
  http://catalina38.org/mailman/listinfo/listserve_catalina38.org


-- 
----------------------------------------
I am using the free version of SPAMfighter for private users.
It has removed 421 spam emails to date.
Paying users do not have this message in their emails.
Try www.SPAMfighter.com for free now!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20060502/d9d9a13e/attachment-0001.htm>