[C38] jib sheet wench

[eyriepg at comcast.net]

Patrick,

Now that you have been sufficiently chastised for your spelling, I would like to commend you on your diligence in maintaining your boat.  I cleaned and lubed my "winches" a couple of years ago and had some difficulty removing the spindle from the base because the screws with Allen wrench heads had seized.  I don't think that it is necessary to actually remove the bases from the boat to adequately clean the winches though.

Since you mentioned the nut dropping into a locker, you must be talking about the port winch.  One should be able to climb into the port side locker and look up at the underside of the coaming and see where the winch is located.  That is where I installed the platform for my refrigerator compressor, but I still have good access to winch base.

Good luck.

Phil Gay
C38 049 Que Linda
Everett, WA

-------------- Original message -------------- 
From: "Patrick Harpole" <1derful at comcast.net> 

I tried to clean my jib sheet wench...  Lewmar 38....and in process detached one of the bolts that hold it to hull...I heard a "thunk" noise....the nut on the other end of bolt had fallen into never never land.....does anyone know how to access the underside of that cockpit wench so I can put the bolt back on...I can just about reach it through the lazerrete but no cigar.
Patrick



I am using the free version of SPAMfighter for private users.
It has removed 643 spam emails to date.
Paying users do not have this message in their emails.
Try SPAMfighter for free now!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20060728/0c74d195/attachment-0001.htm>
-------------- next part --------------
An embedded message was scrubbed...
From: "Patrick Harpole" <1derful at comcast.net>
Subject: [C38] jib sheet wench
Date: Fri, 28 Jul 2006 15:21:08 +0000
Size: 677
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20060728/0c74d195/attachment-0001.eml>