[C38] SSB Radio Grounding

[Larry Malmberg]

Thanks Tom





Larry Malmberg

-----Original Message-----
From: listserve-bounces at catalina38.org
[mailto:listserve-bounces at catalina38.org] On Behalf Of Tom T.
Sent: Tuesday, March 11, 2008 1:58 PM
To: larrypi at linkline.com,Catalina 38 Listserve
Subject: Re: [C38] SSB Radio Grounding


Hello Larry,

I grounded my SSB to the engine via a pair of wires held to the hull by
copper foil.  There is a flexible wire connection from these radials to
ground the rudder also.  The ground from the antenna to the engine is my
main ground with the grounding terminating to the engine which is also
bonded to my fuel tank, propeller shaft, keel, stove, and mast.  Virtually
everything metal on my boat is bonded together so they all become part of
my counterpoise.

I don't think you can have too much grounding with a SSB.  Since my mast
and boom are connected to the keel and all the other bonded items, I was
afraid the close proximity of them to my insulated back stay antenna would
lower my impedance too much and effect my SWR but it seems to tune in fine
on any HF frequency without problems.

Tom Troncalli
The Renata hull 95
St. Pete, Fla

> [Original Message]
> From: Larry Malmberg <larrypi at linkline.com>
> To: Catalina 38 Listserve <listserve at catalina38.org>
> Date: 3/11/2008 1:55:05 PM
> Subject: [C38] SSB Radio Grounding
>
> Has anyone grounded their SSB to the engine?  If so, how has it worked
out?
>
>
>
>
>
> Larry Malmberg
> Hassle Hull 149
>
>
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG. 
> Version: 7.5.518 / Virus Database: 269.21.7/1324 - Release Date:
3/10/2008 7:27 PM



_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org