[C38] Jack Line

[Steve Smolinske]

Mark, not sure I understand about the pad eyes, Where are they located?

________________________________

From: listserve-bounces at catalina38.org
[mailto:listserve-bounces at catalina38.org] On Behalf Of mark turner
Sent: Thursday, July 10, 2008 7:39 AM
To: Catalina 38 Listserve
Subject: Re: [C38] Jack Line


I run the flat webbing from right forward on the toe rail to right aft
level with the wheel. If you come inside the shrouds it gives a clear
run for the whole length of the boat.
Don't forget the padeyes at the forward end of the cockpit so that you
can clip on before coming on deck and clip of after going below.

	----- Original Message ----- 
	From: Steve Smolinske <mailto:SSmolinske at rainierrubber.com>  
	To: Catalina 38 Listserve <mailto:listserve at catalina38.org>  
	Sent: Thursday, July 10, 2008 6:53 AM
	Subject: [C38] Jack Line

	I need to set up my boat for Category II PIYA and would
appreciate ideas on how others have fabricated and secured Jack Lines.
The simplest seems to be flat webbing secured at the mooring cleats.
Thanks
	 
	Steve
	Peregrine
	#312 

	
________________________________


	

	_______________________________________________
	Listserve mailing list
	Listserve at catalina38.org
	http://catalina38.org/mailman/listinfo/listserve_catalina38.org
	

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20080710/8ac9b49f/attachment-0001.htm>