[C38] Listserve Digest, Vol 5, Issue 143
bob gouley
r.gouley at sympatico.ca
Wed Jun 24 20:38:44 EDT 2009
I left a par 38 light on the water tank and burnt a 3 inch round hole
in the top. I used west 6-10 adessive to glue a plexiglass piece over the
hole 3 years no problem.
Bob Gouley
Zephyr # 142
St Joseph Island ontario Canada
----- Original Message -----
From: <listserve-request at catalina38.org>
To: <listserve at catalina38.org>
Sent: Tuesday, June 23, 2009 1:00 PM
Subject: Listserve Digest, Vol 5, Issue 143
> Send Listserve mailing list submissions to
> listserve at catalina38.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> or, via email, send a message with subject or body 'help' to
> listserve-request at catalina38.org
>
> You can reach the person managing the list at
> listserve-owner at catalina38.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Listserve digest..."
>
>
> Today's Topics:
>
> 1. water tank leaking (Kenneth M. Sutto)
> 2. Re: water tank leaking (Larry Malmberg)
> 3. Re: water tank leaking (Tom T.)
> 4. Re: water tank leaking (Rod and Patti Headlee)
> 5. Re: water tank leaking (D McC)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 22 Jun 2009 15:37:39 -0700
> From: "Kenneth M. Sutto" <kmspacific at hotmail.com>
> Subject: [C38] water tank leaking
> To: "Organization - listserve at catalina38" <listserve at catalina38.org>
> Message-ID: <BLU102-W23D485DB401B43BCC84B5FCD390 at phx.gbl>
> Content-Type: text/plain; charset="windows-1252"
>
>
> I have a Ronco B114 water tank in the bow of Sundancer. I think they are
> polyethilene tanks. The plastic vent fitting located at the top is leaking
> where it joins the tank. Is it possible to fix the leak with something
> like JB weld? I don't want to pull the tank to get it welded because big
> job that would be. Any suggestions?
>
>
>
> Ken
>
> "Sundancer"
>
> _________________________________________________________________
> Lauren found her dream laptop. Find the PC that?s right for you.
> http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20090622/53cee708/attachment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 22 Jun 2009 15:51:35 -0700
> From: "Larry Malmberg" <larrypi at linkline.com>
> Subject: Re: [C38] water tank leaking
> To: "'Catalina 38 Listserve'" <listserve at catalina38.org>
> Message-ID: <0196598B42F942A590347619BBAEB160 at lmi.local>
> Content-Type: text/plain; charset="us-ascii"
>
> We used epoxy on our holding tank and it worked good till we got a new
> one,
> same company.
>
>
>
>
>
> Best regards,
>
> Larry Malmberg-President
>
> Larry Malmberg Investigations and Security, Inc.
> 505 North Arrowhead Avenue - Suite 510
> San Bernardino, CA 92401-1200
> 909-383-8565, 800-655-4549 Facsimile 909-383-8566
> PI 15211, PPO 112446
>
> www.larrypi.com
>
>
> All incoming and outgoing e mail is scanned with Norton AntiVirus.
>
> Civil and Criminal, Surveillance, Internal Investigations, Personal and
> Personnel Protection, GPS Tracking and Rental, Notary.
>
> "The American Indians found out what happens when you don't control
> immigration"
>
>
> "Life is not a journey to the grave with the intention of arriving safely
> in
> a pretty and well preserved body, but rather to skid in broadside,
> thoroughly used up, totally worn out, and loudly proclaiming; WOW-- What a
> Ride!"
>
> CONFIDENTIALITY NOTICE: This electronic message, including any
> attachments,
> is for the sole use of the intended recipient(s) and may contain
> confidential and privileged information. Any unauthorized review, copying,
> use, disclosure or distribution of any parts of the contents of this
> message/information is prohibited by federal law. Attempts to intercept
> this
> message are in violation of Title 18 USC 2511(1) of the Electronic
> Communications Privacy Act (ECPA), which subjects the interceptor to
> fines,
> imprisonment and/or civil damages. If you are not the intended recipient,
> please contact the sender by reply e-mail and destroy all copies of the
> original message.
>
>
>
>
> _____
>
> From: listserve-bounces at catalina38.org
> [mailto:listserve-bounces at catalina38.org] On Behalf Of Kenneth M. Sutto
> Sent: Monday, June 22, 2009 3:38 PM
> To: Organization - listserve at catalina38
> Subject: [C38] water tank leaking
>
>
> I have a Ronco B114 water tank in the bow of Sundancer. I think they are
> polyethilene tanks. The plastic vent fitting located at the top is leaking
> where it joins the tank. Is it possible to fix the leak with something
> like
> JB weld? I don't want to pull the tank to get it welded because big job
> that
> would be. Any suggestions?
>
> Ken
> "Sundancer"
>
>
> _____
>
> Lauren found her dream laptop. Find the PC that
> <http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290> 's right
> for you.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20090622/fdcbaa4e/attachment-0001.html>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 22 Jun 2009 20:21:52 -0400
> From: "Tom T." <tdtron at earthlink.net>
> Subject: Re: [C38] water tank leaking
> To: "Catalina 38 Listserve" <listserve at catalina38.org>
> Message-ID: <380-22009622302152890 at earthlink.net>
> Content-Type: text/plain; charset="us-ascii"
>
>
> There should be no pressure on the tank filler neck and I would expect
> Goop or Shoe Goo would do the trick.
>
> If you use Goop, don't use Plumber's Goop because it doesn't harden enough
> for mechanical strength. I use Carpenter's Goop for just about everything
> with good results but I don't really know the differences between the
> different types of Goop other than the soft, weak texture of Plumber's
> Goop.
>
> Tom Troncalli
>
>
> ----- Original Message -----
> From: Kenneth M. Sutto
> To: Organization - listserve at catalina38
> Sent: 6/22/2009 6:37:54 PM
> Subject: [C38] water tank leaking
>
>
> I have a Ronco B114 water tank in the bow of Sundancer. I think they are
> polyethilene tanks. The plastic vent fitting located at the top is leaking
> where it joins the tank. Is it possible to fix the leak with something
> like JB weld? I don't want to pull the tank to get it welded because big
> job that would be. Any suggestions?
>
> Ken
> "Sundancer"
>
>
>
> Lauren found her dream laptop. Find the PC that's right for you.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20090622/073b9e0a/attachment-0001.html>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 22 Jun 2009 19:52:58 -0700 (GMT-07:00)
> From: Rod and Patti Headlee <ja38 at earthlink.net>
> Subject: Re: [C38] water tank leaking
> To: Catalina 38 Listserve <listserve at catalina38.org>
> Message-ID:
> <7613775.1245725578741.JavaMail.root at elwamui-mouette.atl.sa.earthlink.net>
>
> Content-Type: text/plain; charset="us-ascii"
>
> An HTML attachment was scrubbed...
> URL:
> <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20090622/efac300c/attachment-0001.html>
>
> ------------------------------
>
> Message: 5
> Date: Mon, 22 Jun 2009 21:25:49 -0700 (PDT)
> From: D McC <cat38skip at yahoo.com>
> Subject: Re: [C38] water tank leaking
> To: Catalina 38 Listserve <listserve at catalina38.org>
> Message-ID: <530476.6888.qm at web81808.mail.mud.yahoo.com>
> Content-Type: text/plain; charset=utf-8
>
>
>
> Hello Ken,
>
> I have the same tank in Pretty Lady. It split at the aft upper edge due to
> the bulkhead warping. I called Ronco and spoke to an engineer and he said
> that there are no adhesives that will bond the poly tank material as it is
> SO inert. the only way to achieve a real weld is to actually weld it with
> heat using a plastic rod-feed welding machine. He said that you can try to
> do it with a high-heat heat gun. Apply the heat till the plastic appears
> to sweat and hope it re-bonds. I recently found a heat activated PVC
> adhesive that I plan to try. Anything to avoid cutting the V-berth out to
> replace the tank which they still list in their catalog. I will try to
> remember to take pictures of my attempt to fix it and report on the
> results.
>
> ~Dave
>
> --- On Mon, 6/22/09, Kenneth M. Sutto <kmspacific at hotmail.com> wrote:
>
>> From: Kenneth M. Sutto <kmspacific at hotmail.com>
>> Subject: [C38] water tank leaking
>> To: "Organization - listserve at catalina38" <listserve at catalina38.org>
>> Date: Monday, June 22, 2009, 3:37 PM
>>
>>
>>
>> #yiv1379023715 .hmmessage P
>> {
>> margin:0px;padding:0px;}
>> #yiv1379023715 {
>> font-size:10pt;font-family:Verdana;}
>>
>>
>>
>> I have a Ronco? B114 water tank in the bow of
>> Sundancer. I think they are polyethilene tanks. The plastic
>> vent fitting located at the top is leaking where it joins
>> the tank. Is it possible to fix the leak? with
>> something like JB weld? I don't want to pull the tank to
>> get it welded because big job that would be. Any
>> suggestions?
>>
>> ?
>>
>> Ken
>>
>> ?????? "Sundancer"
>>
>> Lauren found her dream laptop. Find
>> the PC that?s right for you.
>>
>> -----Inline Attachment Follows-----
>>
>> _______________________________________________
>> Listserve mailing list
>> Listserve at catalina38.org
>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>>
>
>
>
> ------------------------------
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>
> End of Listserve Digest, Vol 5, Issue 143
> *****************************************
>
More information about the Listserve
mailing list