[C38] cutlass bearing strut

[Max Soto]

Hi Bob,

The strut goes inside the hull about four more inches. The strut base is
curved and is thru bolted to the hull, and then covered with filler. Because
of it's unique shape, you should contact Catalina Yachts or maybe Catalina
Direct.

Regards,

Max Soto
C38 #198 ESTANCIA
Puntarenas, Costa Rica



2009/3/20 bob gouley <r.gouley at sympatico.ca>

>  *     Gentlemen, when I bought my 38 two years ago I knew it had a crack
> in the strut and it had been braize welded.  It is still holding firm, but I
> would like to find a replacement strut, so I can change it out in the
> future.  I don`t know how long the strut is, as it is set in fiberglass. the
> angle of the strut is 11.5 degrees and takes a 1 in and a quarter cutlass
> bearing for the 1 in propeler shaft.  Any one know were I can find one of
> these bronze struts or something suitable as a replacement. thanks bob*
> **
> *r.gouley at sympatico.ca*
> *Zephyr # 142*
> *hilton beach marina*
> *st joseph island *
> *ontario canada*
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>


--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20090320/0f8f7945/attachment-0001.htm>