[C38] water tank leaking

[Larry Malmberg]

We used epoxy on our holding tank and it worked good till we got a new one,
same company.
 




Best regards,

Larry Malmberg-President

Larry Malmberg Investigations and Security, Inc.
505 North Arrowhead Avenue - Suite 510
San Bernardino, CA 92401-1200
909-383-8565, 800-655-4549 Facsimile 909-383-8566
PI 15211, PPO 112446

www.larrypi.com


All incoming and outgoing e mail is scanned with Norton AntiVirus.

Civil and Criminal, Surveillance, Internal Investigations, Personal and
Personnel Protection, GPS Tracking and Rental, Notary.

"The American Indians found out what happens when  you don't control
immigration"


"Life is not a journey to the grave with the intention of arriving safely in
a pretty and well preserved body, but rather to skid in broadside,
thoroughly used up, totally worn out, and loudly proclaiming; WOW-- What a
Ride!"

CONFIDENTIALITY NOTICE: This electronic message, including any attachments,
is for the sole use of the intended recipient(s) and may contain
confidential and privileged information. Any unauthorized review, copying,
use, disclosure or distribution of any parts of the contents of this
message/information is prohibited by federal law. Attempts to intercept this
message are in violation of Title 18 USC 2511(1) of the Electronic
Communications Privacy Act (ECPA), which subjects the interceptor to fines,
imprisonment and/or civil damages. If you are not the intended recipient,
please contact the sender by reply e-mail and destroy all copies of the
original message.


 

  _____  

From: listserve-bounces at catalina38.org
[mailto:listserve-bounces at catalina38.org] On Behalf Of Kenneth M. Sutto
Sent: Monday, June 22, 2009 3:38 PM
To: Organization - listserve at catalina38
Subject: [C38] water tank leaking


I have a Ronco  B114 water tank in the bow of Sundancer. I think they are
polyethilene tanks. The plastic vent fitting located at the top is leaking
where it joins the tank. Is it possible to fix the leak  with something like
JB weld? I don't want to pull the tank to get it welded because big job that
would be. Any suggestions?
 
Ken 
       "Sundancer"


  _____  

Lauren found her dream laptop. Find the PC that
<http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290> 's right
for you. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20090622/fdcbaa4e/attachment-0001.htm>