[C38] A friend of mine a couple of slips down gave me so...

[Steve Smolinske]

Ken,
 
My table looks just like the photos Bret sent I also have an 85.  My table was mounted incorrectly on the x bracket so that when lowered it would not fit properly.  Easy enough to fix but something to keep in mind when you are locating yours. 
 
Steve

________________________________

From: listserve-bounces at catalina38.org on behalf of bikahoga at comcast.net
Sent: Sat 6/27/2009 5:09 AM
To: Catalina 38 Listserve"kmspacific
Subject: Re: [C38] A friend of mine a couple of slips down gave me so...



Hi Ken,

 

I have an 85 C38 and here are a few pictures of my table which is in very good shape, Hope this helps.

 



Brett Cureton
"Jazz"

Annapolis, MD

 


----- Original Message -----
From: "Kenneth M. Sutto" <>
To: "Organization - listserve at catalina38" <listserve at catalina38.org>
Sent: Thursday, June 25, 2009 7:39:43 PM GMT -05:00 US/Canada Eastern
Subject: [C38] A friend of mine a couple of slips down gave me so...


A friend of mine a couple of slips down gave me some Marine Goop. I cleaned preped and applied as instructed. The connection looks very good. I will check it the next few times we go out especially in rough weather to see if the bonding holds.
Thankyou for all your input.
Now my next problem, dinette table. I checked the archives and found some onfo from Stephan  in 2009 and some photos from Max in 2008. My problem is how the table is mounted to the deck. The last owner did a number on the stand. The aluminum tube that fits over the rod has no connectior. When I pull the tube off I can't get the rod off the deck. Everthing wobbles and when I snug on the black nob just above the stand,the table looks like people were line dancing on it. The last owner put a bolt through the aluminum tube and jamed some wood up under the table with a home made wooden clamp. It makes you want to cry when you look underneath. It looks like there was some kind of bracket assembly to steady the table. There is a elongated X with threaded holes with the center fitting over the aluminum sleve. 
Is it possible to get some pictures of what the table looks like underneath so I can make repairs? By the way it's a 1983 boat if that is any help.
Ken
"Sundancer"

_________________________________________________________________
Windows Live(tm): Keep your life in sync. 
http://windowslive.com/explore?ocid=TXT_TAGLM_WL_BR_life_in_synch_062009
_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org


-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 5452 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20090627/f2f17e0c/attachment-0001.bin>