[C38] mainsheet traveler.

[Kenneth M. Sutto]

Thanks Steve. I'll try all the methods sent and let all know what worked.

Ken
 


Date: Fri, 9 Apr 2010 22:18:52 -0700
From: SSmolinske at rainierrubber.com
To: listserve at catalina38.org
Subject: Re: [C38] mainsheet traveler.





liguid wrench sprayed in overnight for a few days and then heat to the track, slight tapping and wiggling with vice grips should do the trick.  



From: listserve-bounces at catalina38.org on behalf of Kenneth M. Sutto
Sent: Fri 4/9/2010 1:55 PM
To: Organization - listserve at catalina38
Subject: [C38] mainsheet traveler.




Here's my problem. The pully wheels on my traveler cars are broken. There are two on each car and are stacked one on top of the other. At the end of the traveler track on each side is a stainless pin through the track stopping the car from going off. On top of the pin and end of the track is a hard rubber cap which I pried off. I cannot remove the pins to get the cars off. I have tried just about everything I know. I am thinking of using heat on the pin then tapping them out with vice grips and a hammer. Any suggestions?
I would send photos but something is wrong with my computer.


Help!!
        Ken Sutto          "Sundancer"



The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail. Get busy.  		 	   		  
_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20100409/90251cb6/attachment-0001.htm>