[C38] Transmission Shift Linkage Bracket

[Max Soto]

Here's a pic from another angle. As Steve said, be very careful with the
bolts. I did the same.........
I'm also planning to make mine from 1/8",  it will flex a lot less and won't
crack again.

Max


2010/8/16 William Knowles <whk1965 at gmail.com>

> Here is a copy of the original blue print. It does not have measurements
> but will help in fabricating a new bracket.
> Good luck!
> Bill Flying Goose
>
> PS try adjusting your shifter following the instructions it worked for me.
> I could not shift out of reverse when the engine was running.
>
> On Mon, Aug 16, 2010 at 12:38 AM, Steve Smolinske <
> SSmolinske at rainierrubber.com> wrote:
>
>> Alex,
>>
>> Not sure if this photo is stock equipment or if some fabricated it along
>> the way, but it works.   One work of caution if you copy this, when
>> tightening the bolts into the transmission be careful not to strip the
>> threads as I did when working on it.   I had to retap the hole and use a
>> larger bolt.   Read the engine manual  I believe there is a discussion on
>> the proper angle that the cable should be in reference to the shifting
>> lever.
>>
>> Steve
>>
>> ________________________________
>>
>> From: listserve-bounces at catalina38.org on behalf of Alex Ho
>> Sent: Sun 8/15/2010 5:12 PM
>> To: Catalina 38 Listserve
>> Subject: Re: [C38] Transmission Shift Linkage Bracket
>>
>>
>> If anyone in the community can provide the dimensions (L x W X D) of the
>> bracket, it would be greatly appreciated.  It does not appear that the part
>> if available anymore.  Any photos would be greatly appreciately for frame of
>> reference to rebuild mine.
>>
>> Thank you..
>> ________________________________
>>
>> From: listserve-bounces at catalina38.org [listserve-bounces at catalina38.org]
>> on behalf of Alex Ho [alex at spirinet.com]
>> Sent: Friday, August 13, 2010 10:40 PM
>> To: listserve at catalina38.org
>> Subject: [C38] Transmission Shift Linkage Bracket
>>
>>
>>
>> It appears that my boat was jury-rigged with a non-original bracket and
>> with some supports.   I am having some shifting problems now and was
>> wondering if someone might know where to order a new bracket that was design
>> for the tranmission?  I believe this is the original HURTH transmission.
>>
>>
>>
>> -Alex
>>
>> 1982 CAT 38
>>
>> Shoal Draft
>>
>>
>> _______________________________________________
>> Listserve mailing list
>> Listserve at catalina38.org
>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>>
>>
>
>
> --
> W H Knowles
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>


-- 
Max Soto
C38 #198 ESTANCIA
Puntarenas, Costa Rica
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20100816/61bd5837/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Moquisha 023.jpg
Type: image/jpeg
Size: 644333 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20100816/61bd5837/attachment-0001.jpg>