[C38] Transmission Shift Linkage Bracket
Alex Ho
alex at spirinet.com
Mon Aug 16 16:29:38 EDT 2010
Max,
Thanks a lot for this photo. Can you get one from the side (where I can see the cable linkage to the shifting lever) if it's not too troublesome? I want to see how the cable is connected to the shifter.
Thanks,
Alex
From: listserve-bounces at catalina38.org [mailto:listserve-bounces at catalina38.org] On Behalf Of Max Soto
Sent: Monday, August 16, 2010 12:15 PM
To: Catalina 38 Listserve
Subject: Re: [C38] Transmission Shift Linkage Bracket
Here's a pic from another angle. As Steve said, be very careful with the bolts. I did the same.........
I'm also planning to make mine from 1/8", it will flex a lot less and won't crack again.
Max
2010/8/16 William Knowles <whk1965 at gmail.com<mailto:whk1965 at gmail.com>>
Here is a copy of the original blue print. It does not have measurements but will help in fabricating a new bracket.
Good luck!
Bill Flying Goose
PS try adjusting your shifter following the instructions it worked for me. I could not shift out of reverse when the engine was running.
On Mon, Aug 16, 2010 at 12:38 AM, Steve Smolinske <SSmolinske at rainierrubber.com<mailto:SSmolinske at rainierrubber.com>> wrote:
Alex,
Not sure if this photo is stock equipment or if some fabricated it along the way, but it works. One work of caution if you copy this, when tightening the bolts into the transmission be careful not to strip the threads as I did when working on it. I had to retap the hole and use a larger bolt. Read the engine manual I believe there is a discussion on the proper angle that the cable should be in reference to the shifting lever.
Steve
________________________________
From: listserve-bounces at catalina38.org<mailto:listserve-bounces at catalina38.org> on behalf of Alex Ho
Sent: Sun 8/15/2010 5:12 PM
To: Catalina 38 Listserve
Subject: Re: [C38] Transmission Shift Linkage Bracket
If anyone in the community can provide the dimensions (L x W X D) of the bracket, it would be greatly appreciated. It does not appear that the part if available anymore. Any photos would be greatly appreciately for frame of reference to rebuild mine.
Thank you..
________________________________
From: listserve-bounces at catalina38.org<mailto:listserve-bounces at catalina38.org> [listserve-bounces at catalina38.org<mailto:listserve-bounces at catalina38.org>] on behalf of Alex Ho [alex at spirinet.com<mailto:alex at spirinet.com>]
Sent: Friday, August 13, 2010 10:40 PM
To: listserve at catalina38.org<mailto:listserve at catalina38.org>
Subject: [C38] Transmission Shift Linkage Bracket
It appears that my boat was jury-rigged with a non-original bracket and with some supports. I am having some shifting problems now and was wondering if someone might know where to order a new bracket that was design for the tranmission? I believe this is the original HURTH transmission.
-Alex
1982 CAT 38
Shoal Draft
_______________________________________________
Listserve mailing list
Listserve at catalina38.org<mailto:Listserve at catalina38.org>
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
--
W H Knowles
_______________________________________________
Listserve mailing list
Listserve at catalina38.org<mailto:Listserve at catalina38.org>
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
--
Max Soto
C38 #198 ESTANCIA
Puntarenas, Costa Rica
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20100816/93bb7c5b/attachment-0001.htm>
More information about the Listserve
mailing list