[C38] Halyards

Jay Sorensen jsorensen at novarx.com
Wed Jan 12 11:18:46 EST 2011


Thank you Steve!

 

The combination of photo and link showed exactly what we are facing.  I
think we'll wait until the mast is down to replace the sheaves given the
low probability of halyard damage.  Your masthead looks like its right
out of the box!  Nice work!  Maybe in a few years our sister ship will
look as good.  I think I noticed 2 spinnaker halyards, yes?  If so, did
you run the 2nd halyard down the inside of the mast or outside?  

 

Thanks!.............Jay

 

Jay & Dorothy Sorensen

C-38 #311 Broad Reach

San Diego, CA

 

________________________________

From: listserve-bounces at catalina38.org
[mailto:listserve-bounces at catalina38.org] On Behalf Of Steve Smolinske
Sent: Tuesday, January 11, 2011 6:41 PM
To: Catalina 38 Listserve
Subject: RE: [C38] Halyards

 

Jay,

 

Here are a few photos of my mast when it was down and being worked on
and then back up.  In the one you can see the painted mast with the
cover plates removed and in the other with the plate in place.  this
should help with giving some perspective to what Tom talked about trying
to do it from the top of the mast.   Our masts were manufactured by
lefeill http://www.lefiell.com/2marine_main.html  This link goes to the
mast and mast head page, I believe our mast is p/n OM4C with a cut
length of 55'  Im sure they could probably give you a schematic of the
proper mast head so that you could get another perspective of how the
sheaves and pins fit together inside. 

 

Steve

#312 Peregrine

Seattle

 

________________________________

From: listserve-bounces at catalina38.org on behalf of Jay Sorensen
Sent: Tue 1/11/2011 8:55 AM
To: Catalina 38 Listserve
Subject: Re: [C38] Halyards

 

Good Morning All,

First, thanks for your help with the salon shelf storage options.  First
mate Dorothy is very happy with the lined baskets on the top shelves and
the extra rail on the bottom. 

Now for the next question trying to save a trip up the mast.  Can anyone
tell me if sheeve box needs to be removed from the masthead to replace
the sheeves?  Or is there a pin that goes all the way through the mast.
Ours is a 1985 model. 

I'm going to 7/16" Sta-Set X halyards and want to remove the combination
sheeves as I'm concerned about the semi-circle indent on the current
version.  7/16" line seems to run smoothly, but I'm not sure about wear.
New sheeves should be cheap insurance.

Thanks!

Jay & Dorothy Sorensen
C-38 #311, Broad Reach
San Diego, CA

_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org

________________________________

No virus found in this message.
Checked by AVG - www.avg.com <http://www.avg.com/> 
Version: 10.0.1191 / Virus Database: 1435/3373 - Release Date: 01/11/11

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20110112/0449897c/attachment-0001.htm>


More information about the Listserve mailing list