[C38] Watermakers

[Craig Steinkraus]

Has anyone ever installed a watermaker on their C-38. If so, I would like to know what type and where they installed it. As we plan on taking off for blue waters and white sand next spring, any help would be appreciated!

Thanks

Craig
"Wings"  C-38 # 280
  ----- Original Message ----- 
  From: Richard West 
  To: Catalina 38 Listserve 
  Sent: Thursday, September 15, 2011 11:08 AM
  Subject: Re: [C38] Skegs (not kegs!)


  Was this link on the list a couple of days ago?  Maybe I found it somewhere else, I don't remember.  Anyway, here's a great site that shows the Yankee 38 rudder clearly.


  http://sparkmanstephens.blogspot.com/2011/03/design-2094-c2-yankee-38.html


  Rich, Legacy, #360, Los Angeles





  On Wed, Sep 14, 2011 at 6:16 PM, Max Soto <maxsoto at gmail.com> wrote:

    I've never seen a Yankee 38, but  I read that one of the modifications that Frank Butler did to the 38 was replacing the skeg mounted rudder for a spade rudder. Also said that the mast was replaced for a taller one with small boom, but still, hull #1 came with the Yankee  mast... So, who knows...  Could there be a 38 with skeg rudder??    We have noticed many differences between early and later models during this year, so who knows... Butler, perhaps??
    Regards,
    Max
    Sent from my iPod


    On Sep 14, 2011, at 18:29, "tdtron at earthlink.net" <tdtron at earthlink.net> wrote:

    > I sold my 38 but it was a 1981, hull  #95, shoal draft with a skeg mounted
    > cutlass bearing but the rudder was the same as on the deep fin models.  The
    > skeg mounted cutlass gave some additional keel surface to compensate for
    > the shorter keel but I don't think there was any difference in the rudder.
    >
    > Does anyone know if the Yankee 38 had a skeg rudder?
    >
    > Tom Troncalli
    > Recovering ex-Catalina 38 owner
    >
    >
    >> [Original Message]
    >> From: John Felkins <jrfelkins at gmail.com>
    >> To: listserve at catalina38.org <listserve at catalina38.org>
    >> Date: 9/14/2011 5:31:52 PM
    >> Subject: [C38] Skegs (not kegs!)
    >>
    >> Are there certain years that the Cal38 was built with a skeg rudder? I'm
    > pretty sure I've seen a pic of one but don't know if it's a mod. Thanks!
    >>
    >>
    >> John Felkins P.E.
    >> TN CEI Leader
    >> KCI Technologies, Inc.
    >> 7003 Chadwick Drive, Ste. 343 Brentwood, TN 37209
    >> Phone: 615-594-9127
    >> Fax: 888-854-4780
    >> www.kci.com
    >>
    >>
    >> _______________________________________________
    >> Listserve mailing list
    >> Listserve at catalina38.org
    >> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
    >
    >
    >
    > _______________________________________________
    > Listserve mailing list
    > Listserve at catalina38.org
    > http://catalina38.org/mailman/listinfo/listserve_catalina38.org

    _______________________________________________
    Listserve mailing list
    Listserve at catalina38.org
    http://catalina38.org/mailman/listinfo/listserve_catalina38.org





------------------------------------------------------------------------------


  _______________________________________________
  Listserve mailing list
  Listserve at catalina38.org
  http://catalina38.org/mailman/listinfo/listserve_catalina38.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20110915/211f6738/attachment-0001.htm>