[C38] Watermakers

[Steve Smolinske]

Craig I Installed a spectra in the bow we removed the watertank and put a new tank under the starboard sette.  

Steve Smolinske

Sent from my iPhone

On Sep 15, 2011, at 11:34 AM, "Craig Steinkraus" <Navion at Charter.net> wrote:

> Has anyone ever installed a watermaker on their C-38. If so, I would like to know what type and where they installed it. As we plan on taking off for blue waters and white sand next spring, any help would be appreciated!
>  
> Thanks
>  
> Craig
> "Wings"  C-38 # 280
> ----- Original Message -----
> From: Richard West
> To: Catalina 38 Listserve
> Sent: Thursday, September 15, 2011 11:08 AM
> Subject: Re: [C38] Skegs (not kegs!)
> 
> Was this link on the list a couple of days ago?  Maybe I found it somewhere else, I don't remember.  Anyway, here's a great site that shows the Yankee 38 rudder clearly.
> 
> http://sparkmanstephens.blogspot.com/2011/03/design-2094-c2-yankee-38.html
> 
> Rich, Legacy, #360, Los Angeles
> 
> 
> 
> On Wed, Sep 14, 2011 at 6:16 PM, Max Soto <maxsoto at gmail.com> wrote:
> I've never seen a Yankee 38, but  I read that one of the modifications that Frank Butler did to the 38 was replacing the skeg mounted rudder for a spade rudder. Also said that the mast was replaced for a taller one with small boom, but still, hull #1 came with the Yankee  mast... So, who knows...  Could there be a 38 with skeg rudder??    We have noticed many differences between early and later models during this year, so who knows... Butler, perhaps??
> Regards,
> Max
> Sent from my iPod
> 
> On Sep 14, 2011, at 18:29, "tdtron at earthlink.net" <tdtron at earthlink.net> wrote:
> 
> > I sold my 38 but it was a 1981, hull  #95, shoal draft with a skeg mounted
> > cutlass bearing but the rudder was the same as on the deep fin models.  The
> > skeg mounted cutlass gave some additional keel surface to compensate for
> > the shorter keel but I don't think there was any difference in the rudder.
> >
> > Does anyone know if the Yankee 38 had a skeg rudder?
> >
> > Tom Troncalli
> > Recovering ex-Catalina 38 owner
> >
> >
> >> [Original Message]
> >> From: John Felkins <jrfelkins at gmail.com>
> >> To: listserve at catalina38.org <listserve at catalina38.org>
> >> Date: 9/14/2011 5:31:52 PM
> >> Subject: [C38] Skegs (not kegs!)
> >>
> >> Are there certain years that the Cal38 was built with a skeg rudder? I'm
> > pretty sure I've seen a pic of one but don't know if it's a mod. Thanks!
> >>
> >>
> >> John Felkins P.E.
> >> TN CEI Leader
> >> KCI Technologies, Inc.
> >> 7003 Chadwick Drive, Ste. 343 Brentwood, TN 37209
> >> Phone: 615-594-9127
> >> Fax: 888-854-4780
> >> www.kci.com
> >>
> >>
> >> _______________________________________________
> >> Listserve mailing list
> >> Listserve at catalina38.org
> >> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> >
> >
> >
> > _______________________________________________
> > Listserve mailing list
> > Listserve at catalina38.org
> > http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20110915/9e3b5975/attachment-0001.htm>