[C38] Throttle cable and rudder cable

[Steve Smolinske]

Patrick
 
I just forwarded to you the next mainsheet article which covers rebuilding the steering from my AOL account.  For some reason this account will not let me forward emails with photo attachments.  The article should help you with this problem.   If not let me know, thanks. 
 
Steve
 

________________________________

From: listserve-bounces at catalina38.org on behalf of Patrick Harpole
Sent: Mon 10/31/2011 8:55 PM
To: Catalina 38 Listserve
Subject: [C38] Throttle cable and rudder cable



Mine broke at the pedestal....right after the metal sleeve.  I try to pull
it out but it doesn't want to come out.  Shall I just pull harder.

I also had the good fortune of loosing control of rudder.  I looked and
found the cable that is supposed to wrap around donut-shaped device with
grooves in it does not have the cable in the grooves.  Is it OK to put a
screw driver under cable and have someone turn wheel.  I hope this would
snap it back into track on donut..


_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org


-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 4190 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20111031/3c361b70/attachment-0001.bin>