[C38] Listserve Digest, Vol 9, Issue 39

[Max Soto]

Hi Paul, you should post that as a neew thread so everybody can see it...
 I need to buy a aluminum cylnder because there are no 6lbs fiberglass
cylinders.. Otherwise, I will go for the fiberglass one..
Just my thought!!
Regards,
Max


2013/3/4 PAUL NOTTE <panotte at shaw.ca>

> I use a "5 part" same as the old vang setup sending someone aloft the
> mast. You can pull your self up very easy , well once I hit 60 it became a
> little more difficult.
> On another note I have one of the older aluminum two and a half pound
> propane cylinders, it needs to be re-valved , the techie in my area says he
> cannot get the parts ....do I buy a new fiberglass or can I get parts in
> the U.S.
>
> PAUL
> iMPULSE 328
>
> ----- Original Message -----
> From: "Steve Smolinske" <SSmolinske at rainierrubber.com>
> To: "alden642" <alden642 at comcast.net>, "Catalina 38 Listserve" <
> listserve at catalina38.org>
> Sent: Sunday, March 3, 2013 9:19:08 PM
> Subject: Re: [C38] Listserve Digest, Vol 9, Issue 39
>
>
>
>
>
> I use to have 3 Lewmar 30s on the mast two on starboard, one on Port, have
> since moved two of them to the deck and replaced the other on starboard
> with a lewmar 30st for the main. If sending someone aloft don’t use a mast
> mounted winch, safer to lead it back to the cockpit. You only have five
> screws holding the winch to the mast, and the thickness of the mast does
> not allow enough bite of threads to safely send someone up.
>
>
>
> Steve
>
>
>
>
>
>
>
> From: listserve-bounces at catalina38.org [mailto:
> listserve-bounces at catalina38.org] On Behalf Of alden642
> Sent: Sunday, March 03, 2013 3:06 PM
> To: listserve at catalina38.org
> Subject: Re: [C38] Listserve Digest, Vol 9, Issue 39
>
>
>
>
> I use a anderson 40 st. Alden andre
>
>
>
>
>
>
>
>
>
> Sent via the Samsung Galaxy S™III, an AT&T 4G LTE smartphone
>
>
>
>
> -------- Original message --------
> From: listserve-request at catalina38.org
> Date:
> To: listserve at catalina38.org
> Subject: Listserve Digest, Vol 9, Issue 39
>
>
> Send Listserve mailing list submissions to
> listserve at catalina38.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> or, via email, send a message with subject or body 'help' to
> listserve-request at catalina38.org
>
> You can reach the person managing the list at
> listserve-owner at catalina38.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Listserve digest..."
>
>
> Today's Topics:
>
> 1. Mast winches (MB Contact)
> 2. Re: Mast winches (Steven Ribble)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 3 Mar 2013 10:56:07 -0500
> From: MB Contact < mixedbusinesscontact at gmail.com >
> To: Catalina 38 Listserve < listserve at catalina38.org >
> Subject: [C38] Mast winches
> Message-ID: < 90246657-186F-402E-BE48-0361AEF011E3 at gmail.com >
> Content-Type: text/plain; charset=us-ascii
>
> Anyone have a selftalier on the mast / main halyard? What size?
>
> I want to swap out the original(?) lewmar 16 two speed on the mast (main
> halyard) for a self tailer but I see the new 16st are only 1 speed.... Do I
> care about losing that 2nd gear... do I go up to a 30?
>
> Mark
> Momentous #230
> Baltimore
>
>
>
> Sent from my iPad
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 3 Mar 2013 11:12:59 -0500
> From: Steven Ribble < steve.ribble at gmail.com >
> To: Catalina 38 Listserve < listserve at catalina38.org >
> Subject: Re: [C38] Mast winches
> Message-ID:
> < CAKrT=P=gXL2ri5=be6_EZDb5Ank+oq8EdcSx-bs1wVz+SsJFrA at mail.gmail.com >
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi Mark. I've run my main halyard back to the cockpit and use a two speed
> Lew 30ST. I use the original (a single speed Lew 30) for the second jib
> halyard. 16 seems a little light.
>
> Steve
> Tittravate, #64
>
>
> --
> Steve Ribble
> 207/852-0971
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20130303/7c23bd74/attachment-0001.html>
>
> ------------------------------
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>
> End of Listserve Digest, Vol 9, Issue 39
> ****************************************
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>



-- 
Max Soto
C38 #198 ESTANCIA
Puntarenas, Costa Rica
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20130304/7482a96e/attachment-0001.htm>