[C38] Heat Exchanger

[William Knowles]

Michael I think the blueprint is on the association site.


On Thu, Jun 26, 2014 at 12:02 AM, Michael de lisle <krazymiked at gmail.com>
wrote:

> I just removed a gummed up heat exchanger from hull #240 (1983 C38) and
> found a strange and confusing jumble of pipes, hoses and other things going
> from the engine to the HX to the water heater and back to the HX that are
> definitely not stock configuration on this boat. Does anyone have a picture
> of their HX set up? I have an idea of how this is supposed to go back
> together but a visual would be helpful. My plan is to soak the unit in
> muriatic acid over night to clean all the gunk out and then reinstall. The
> HX seams to be doing fine other than being gummed up so I am going to forgo
> the pressure test this go around. I would really like to see how the hoses
> are laid out as well as the support bracket. My bracket was modified at
> some point and they did a very shoddy job. Thanks.
>
> Mike D.
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>


-- 
W H Knowles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20140626/f19b644d/attachment-0001.htm>