[C38] Heat Exchanger

[Michael de lisle]

Thanks. I will go take a look.
On Jun 26, 2014 5:00 AM, "William Knowles" <whk1965 at gmail.com> wrote:

> Michael I think the blueprint is on the association site.
>
>
> On Thu, Jun 26, 2014 at 12:02 AM, Michael de lisle <krazymiked at gmail.com>
> wrote:
>
>> I just removed a gummed up heat exchanger from hull #240 (1983 C38) and
>> found a strange and confusing jumble of pipes, hoses and other things going
>> from the engine to the HX to the water heater and back to the HX that are
>> definitely not stock configuration on this boat. Does anyone have a picture
>> of their HX set up? I have an idea of how this is supposed to go back
>> together but a visual would be helpful. My plan is to soak the unit in
>> muriatic acid over night to clean all the gunk out and then reinstall. The
>> HX seams to be doing fine other than being gummed up so I am going to forgo
>> the pressure test this go around. I would really like to see how the hoses
>> are laid out as well as the support bracket. My bracket was modified at
>> some point and they did a very shoddy job. Thanks.
>>
>> Mike D.
>>
>> _______________________________________________
>> Listserve mailing list
>> Listserve at catalina38.org
>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>>
>>
>
>
> --
> W H Knowles
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20140626/2dc2354a/attachment-0001.htm>