[C38] exhaust riser

[Max Soto]

Hi David, I  made this one three months ago for Estancia's new engine. 
I bought the stainless parts on a hardware store and took the to a weld shop.  They fabricated the two flangers.  I reused my new engine riser elbow, but for the 5425 you just need to insert a smaller diameter threaded pipe in the last curve, and it will last for a long time.  It was so cheap this way.  
The one I made for my old 5424 was made out of threaded pipes.  It was very easy to install and align, but the threads needed to be sealed real good to avoid exhaust leaks.  
Hope this helps!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.JPG
Type: image/jpeg
Size: 29648 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20150630/84f4b8b3/attachment-0001.jpe>
-------------- next part --------------


Max Soto 
C38 Estancia
+506-8312-1367
Alajuela, Costa Rica 

> On 29/6/2015, at 17:08, David Stoltz <sportscinema at earthlink.net> wrote:
> 
> 
> Hi,
> Does anyone out there happen to have an exhaust riser for a Universal Model 5424. It's going to take 4 to 8 weeks to have a new one made and they want the old one so
> they can replicate it. Evidently, they are not all the same. I would like to have a temporary replacement so I can still use the boat during that time.
> Thanks,
> David Stoltz
> Andiamo #297
> MdR
> 
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org