[C38] exhaust riser

[David STOLTZ]

Thanks Tom, I'll give that a try. Dish soap can also work.

Sent from my iPhone

> On Jul 4, 2015, at 6:05 PM, Tom Troncalli <tdtron at earthlink.net> wrote:
> 
> Hello David,
> 
> I also had trouble getting the hose back on the muffler.  If I remember, I think I greased the muffler nipple and then I used a very large Channel Lock type pliers inserted in the hose to spread the hose slightly which made an impossible problem possible.  If you don't have pliers large enough to spread the hose you could make a spreader tool by bolting two pieces of steel tubing together in an "X" to accomplish  the same thing.
> 
> The grease didn't seem to effect the connection once the hose was in place.
> 
> Tom Troncalli
> 
> 
> 
> 
> 
>> On 7/4/2015 8:07 PM, David STOLTZ wrote:
>> Hi,
>> Having a problem connecting the exhaust hose to the plastic muffler tank. If you have replaced your exhaust riser you know there is very little room between the neck on the tank and the fiberglass structure above it
>> and the 2" exhaust hose is anything but flexible. Any suggestions?
>> Thanks very much.
>> David
>> 
>> Sent from my iPhone
>> 
>>> On Jun 29, 2015, at 7:51 PM, Steve Smolinske <SSmolinske at rainierrubber.com> wrote:
>>> 
>>> David, mine broke a few years ago while cruising, I spent some time in
>>> Friday Harbor and built the one in the attached picture from parts I got
>>> at the hardware store, it lasted about two years, then I fabricated the
>>> stainless steel one and bracket at work.
>>> 
>>> Steve
>>> #312 Peregrine
>>> Seattle
>>> 
>>> 
>>> -----Original Message-----
>>> From: Listserve [mailto:listserve-bounces at catalina38.org] On Behalf Of
>>> David Stoltz
>>> Sent: Monday, June 29, 2015 4:09 PM
>>> To: Catalina 38 Listserve
>>> Subject: [C38] exhaust riser
>>> 
>>> 
>>> Hi,
>>> Does anyone out there happen to have an exhaust riser for a Universal
>>> Model 5424. It's going to take 4 to 8 weeks to have a new one made and
>>> they want the old one so they can replicate it. Evidently, they are not
>>> all the same. I would like to have a temporary replacement so I can
>>> still use the boat during that time.
>>> Thanks,
>>> David Stoltz
>>> Andiamo #297
>>> MdR
>>> 
>>> 
>>> _______________________________________________
>>> Listserve mailing list
>>> Listserve at catalina38.org
>>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>>> <IMG_6291.JPG>
>>> <photo1.jpg>
>>> _______________________________________________
>>> Listserve mailing list
>>> Listserve at catalina38.org
>>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>> _______________________________________________
>> Listserve mailing list
>> Listserve at catalina38.org
>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>> 
>> 
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2015.0.6037 / Virus Database: 4365/10159 - Release Date: 07/04/15
> 
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org