[C38] Exhaust riser

[Max Soto]

Hi David, I sent pics of the exhaust riser that I made for my new engine, and here are some pics of the stainless riser I made for my old engine... 
This one is very cheap to build, and will last a lifetime. 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.JPG
Type: image/jpeg
Size: 33475 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20150709/609ad1dc/attachment-0003.jpe>
-------------- next part --------------

-------------- next part --------------
A non-text attachment was scrubbed...
Name: image2.JPG
Type: image/jpeg
Size: 32010 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20150709/609ad1dc/attachment-0004.jpe>
-------------- next part --------------

-------------- next part --------------
A non-text attachment was scrubbed...
Name: image3.JPG
Type: image/jpeg
Size: 30824 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20150709/609ad1dc/attachment-0005.jpe>
-------------- next part --------------
The holes in the small pipe are for the water to cool the walls of the outer pipe, so the hose won't be burned.  
This goes threaded to other pipes, so a good sealant should be applied  to avoid leaks. 

Regards,

Max Soto 
C38 Estancia
+506-8312-1367
Alajuela, Costa Rica 

> On 8/7/2015, at 16:16, David Stoltz <sportscinema at earthlink.net> wrote:
> 
> 
> Hi Greg,
> I installed teak & holly in mine this spring and am very pleased with the results.
> David
> Andiamo #297
> MdR, CA
> <IMG_0120.JPG>
> 
> 
>> On Jul 6, 2015, at 9:14 AM, Greg S. Hart wrote:
>> 
>> Good Afternoon All,
>> 
>> As we are winding down our major refit. As you may remember we bought Hull #
>> 95 while she was on her last leg after a few years of abuse.  So far we have
>> added a 1650 BTU climate control system, pulled and rewired the mast.
>> Replaced the mast step, changed all lights to Led, recovered all the
>> cushions, upgraded the companion way doors,  replaced all the port lights,
>> rebuilt the engine and transmission, replaced all deck lines, added stern
>> rail seats, rewired the electrical panel, repaired existing hull damage and
>> painted the hull and deck, and added all new electronics.  
>> 
>> Next on the list is the floor and dinghy davits. Any input from the group
>> would be much appreciated with either or both of those issues.
>> 
>> If you have any questions about what we have already done, we will be happy
>> to share.
>> 
>> 
>> Greg Hart
>> Folly's Best #95
>> Charleston SC 
>> <IMG_4249.jpg>_______________________________________________
>> Listserve mailing list
>> Listserve at catalina38.org
>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> 
> David Stoltz
> Executive Producer
> 310.785.9100
> 
> 
> 
> 
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org