[C38] mast base

[William Knowles]

Had it done on our boat did you cut out the floor? There are instructions
on the web site. We did not redo the floor,just put a piece of wood trim
around the hole. be sure to inspect the base of the mast for corrosion. One
tip ask your insurance if it covered mine paid to pull the mast to inspect,
saved big bucks.

On Mon, Jul 20, 2015 at 8:15 PM, Steve Smolinske <
SSmolinske at rainierrubber.com> wrote:

> Check the web site I think there might be a write up on file.  If not
> search the archives. I seem to remember a thread some years ago.  Good luck.
>
> Sent from my iPhone
>
> > On Jul 20, 2015, at 5:05 PM, Robert G Stammerjohn <
> rgstam at md.metrocast.net> wrote:
> >
> > My wooden base for the mast has turned to mush and my shrouds have
> loosened. Has anyone performed a repair. I need all help I can find.
> Hull#307 '84. The Boat is good shape otherwise.  help !
> >
> >
> > Sent from my iPhone
> > _______________________________________________
> > Listserve mailing list
> > Listserve at catalina38.org
> > http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>



-- 
W H Knowles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20150721/138b5482/attachment-0001.htm>