[C38] Spreaders.

fleet2001 at aol.com fleet2001 at aol.com
Thu May 11 15:35:19 EDT 2017


Thanks Steve.  I'll give it a try.



-----Original Message-----
From: Steve Smolinske <SSmolinske at rainierrubber.com>
To: Catalina 38 Listserve <listserve at catalina38.org>
Sent: Thu, May 11, 2017 12:41 pm
Subject: Re: [C38] Spreaders.



Big rubber mallet, you can move them under load if its small, if it’s a big adjustment loosen them
 
 
From: Listserve [mailto:listserve-bounces at catalina38.org]On Behalf Of fleet2001 at aol.com
Sent: Thursday, May 11, 2017 9:37 AM
To: listserve at catalina38.org
Subject: Re: [C38] Spreaders.
 
According to the catalina 38 one design racing rules, the uppers are 32" and the 
lowers are 40".  But how do I do it? Maybe loosen the shrouds, move the spreaders to the proper angle and have someone below tighten the shrouds while I hold it at the proper angle?

 

-----Original Message-----
From: Steve Smolinske <SSmolinske at rainierrubber.com>
To: Catalina 38 Listserve <listserve at catalina38.org>
Sent: Thu, May 11, 2017 12:15 pm
Subject: Re: [C38] Spreaders.


Measure the distance from the tip of the spreader to the edge of the mast,  Not sure what it is supposed to be but I think it is in a previous thread from years ago.   

 

From: Listserve [mailto:listserve-bounces at catalina38.org]On Behalf Of fleet2001 at aol.com
Sent: Thursday, May 11, 2017 9:11 AM
To: Listserve at catalina38.org
Subject: [C38] Spreaders.

 

Can someone explain how to properly adjust the spreader angles?  I know that the uppers are 7 degrees and the lowers are 1 degree.  


 


Thank you guys,


 


Rich Grassia "MERRICONEAG"


_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org


_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20170511/2ddf314d/attachment-0001.htm>


More information about the Listserve mailing list