[C38] Snake wire through stanchion
1derful@comcast
1derful at comcast.net
Thu Feb 15 15:49:23 EST 2018
Thanks......will try to fix tomorrow
> On February 14, 2018 at 1:18 PM Steve Smolinske <SSmolinske at rainierrubber.com> wrote:
>
>
> On Peregrine there was a hole under the port forward stanchion base that the wire was run through, When I did the radar post I moved the stern light to the pole and used the previous wire run for the satellite antenna, had to put a face plate on to protect the large cable as it could not make the tight radius inside the stanchion,
>
>
>
>
>
> From: Listserve [mailto:listserve-bounces at catalina38.org] On Behalf Of Max soto
> Sent: Wednesday, February 14, 2018 1:12 PM
> To: Catalina 38 Listserve
> Subject: Re: [C38] Snake wire through stanchion
>
>
>
> Mine came with no wire.. owner removed it and installed the light somewhere else.
>
> I installed it the way it was with a bike brake wire as messenger. Don't remember where did I started, top, or bottom.. but it was not that hard...
>
> You can also instal a 16 gauge wire and install a LED light...
>
>
>
> Regards,
>
>
> Max Soto A.
>
> +506-8312-1367
>
> Alajuela, Costa Rica
>
>
> On Feb 14, 2018, at 13:44, Dick Kilroy <dickkilroy at comcast.net mailto:dickkilroy at comcast.net > wrote:
>
> > >
> > Tried to do this many years ago. Probably around 2000. Carefully look at your stern pulpit you will see, I believe the way Catalina assembled it, that you cannot get through the centerpiece from the top. It is made in such a manner that the cross-section is the solid piece in the upper and lower portions are the part welded to it.
> >
> > Good luck
> >
> >
> >
> > Dick
> >
> > Sent from my iPad
> >
> >
> > On Feb 14, 2018, at 10:57 AM, 1derful at comcast <1derful at comcast.net mailto:1derful at comcast.net > wrote:
> >
> > > > >
> > > It's me again.
> > >
> > >
> > >
> > > My stern light's wiring corroded. I tried to pull it out and after 12" wire retrieved it broke. Wire's threaded through stanchion and comes out on port side in storage area. About 6 foot run.
> > >
> > >
> > >
> > > Problem is snaking 14 gauge wire around corners and probably necessity of removing wire that is still in stanchion.
> > >
> > >
> > >
> > > Any tips?
> > >
> > >
> > >
> > > Weather is too nice to stay in slip.
> > >
> > >
> > >
> > > Blue Eyes,
> > >
> > >
> > >
> > > AKA Patrick
> > >
> > >
> > >
> > > SF Bay Area
> > >
> > > > >
> > > > >
> > > _______________________________________________
> > > Listserve mailing list
> > > Listserve at catalina38.org mailto:Listserve at catalina38.org
> > > http://catalina38.org/mailman/listinfo/listserve_catalina38.org https://linkprotect.cudasvc.com/url?a=http://catalina38.org/mailman/listinfo/listserve_catalina38.org&c=E,1,Q8t29EgQKwJHnq17r4JYWFllg5IOKRNWV46bwhGEaB8UeYeh_Uurep79xuzwps2hi41iil1l5W-JGWGQlNxWDCcrfDdEJvKhpLy0SyeM2SjrxeG0BEwb6vWlL5EK&typo=1
> > >
> > > > >
> > >
> > >
> > _______________________________________________
> > Listserve mailing list
> > Listserve at catalina38.org mailto:Listserve at catalina38.org
> > http://catalina38.org/mailman/listinfo/listserve_catalina38.org https://linkprotect.cudasvc.com/url?a=http://catalina38.org/mailman/listinfo/listserve_catalina38.org&c=E,1,i2S8itVZhaPTxmVvlUvBI8eJiXzo2dwoGl_cjCVBAB-xmDgDugFFgsB53NbVKMQLQZsn3UcLGl0So31Ij93j4YYtxMZJ6smQK_CdfzkbA1ZxRfY,&typo=1
> >
> > >
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20180215/a4134905/attachment-0001.htm>
More information about the Listserve
mailing list