[C38] Dock Lines

[Larrypi at earthlink.net]

Thank you Steve Orton, as always you are the best!

 

 

 

Larry Malmberg

909-208-1847

 

The problem with most political jokes is, they get elected.

 

From: Listserve <listserve-bounces at catalina38.org> On Behalf Of S Orton
Sent: Friday, September 28, 2018 5:23 PM
To: Larrypi at earthlink.net; Catalina 38 Listserve <listserve at catalina38.org>
Subject: Re: [C38] Dock Lines

 

Another thought:  I buy a good quality 1/2 inch, 3 strand nylon (yes nylon)
line in bulk and replace the dock lines as needed probably every 3-4 years
as chaffing demands and use no protection.  The down side of nylon of course
is UV degradation, but chaffing destroys it first.  The good side is 3
strand nylon is a lot more elastic (elasticity is a good trait for dock
lines) than braided low stretch dock lines which have are more UV resistant,
but again it is chaffing that destroys your lines.  At our marina we share a
40 ft slip.  We use 2 long spring lines, a very short stern line and 2
medium length bow lines.  The 3 strand line is very easy to make with custom
lengths and a  spliced loop.  In the 20 years owning our boat, we have never
had a dock line failure.  The last 8 years, the boat has been in the NW
where we get considerable boat movement as storms rolls through.

Cheers,  Steve O (Santa Susanna)

  _____  

From: Listserve <listserve-bounces at catalina38.org
<mailto:listserve-bounces at catalina38.org> > on behalf of
Larrypi at earthlink.net <mailto:Larrypi at earthlink.net>  <Larrypi at earthlink.net
<mailto:Larrypi at earthlink.net> >
Sent: Friday, September 28, 2018 12:54 PM
To: 'Catalina 38 Listserve'
Subject: Re: [C38] Dock Lines 

 

Thanks Chuck, I think you and Max Soto have the right answer.

 

 

 

Larry Malmberg

909-208-1847

 

The problem with most political jokes is, they get elected.

 

From: Listserve <listserve-bounces at catalina38.org
<mailto:listserve-bounces at catalina38.org> > On Behalf Of Charles Finn
Sent: Friday, September 28, 2018 10:27 AM
To: listserve at catalina38.org <mailto:listserve at catalina38.org> 
Subject: Re: [C38] Dock Lines

 

Larry,

I consider one of the design errors S&S and Catalina made on our boat is the
bow mooring/dock cleat setup.  Works great at anchor or on a mooring, but
requires we run dock lines over the rail when at a dock, which most boats
are these days.  Frankly, I don't think any chaffing will work well sawing
on the rail.  So, I installed a couple guides in a portion of the rail that
was easily removed.  They are quite secure as they are bolted through the
bottom portion of the rail.  
This still does not answer the problem of where the bow cleat is located,
but at least I am not sawing off lines!  I did this a couple years ago after
finding significant wear on a new set of lines over just one summer.  So
far, I have seen no chaffing in two years even though we have had some
pretty violent weather!
BTW,  I vote for leather chaffing gear as fire hose is water proof and most
chaffing failure is due to the heat generated that can be cooled if the
chaffing gear lets water into the line.

Chuck Finn
Mighty Quinn  #114
Bayfield, Lake Superior

On 9/27/2018 12:01 PM, Larrypi at earthlink.net <mailto:Larrypi at earthlink.net>
wrote:

I have a question, I just ordered new dock lines for Hassle.  Typically they
wear out due to the toe rail rubbing on them.  What can you all suggest to
prevent this?  I was thinking about some shrink wrap but don't know.  I have
used old fire hose before but it kept coming off.

 

 

 

Larry Malmberg

909-208-1847

 

The problem with most political jokes is, they get elected.

 





_______________________________________________
Listserve mailing list
Listserve at catalina38.org <mailto:Listserve at catalina38.org> 
http://catalina38.org/mailman/listinfo/listserve_catalina38.org

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20180929/7a9ae33c/attachment-0001.htm>