[C38] Innerstay deck fitting

Ray Torok torok13731 at gmail.com
Mon Apr 11 12:18:45 EDT 2022


Hi Max,

I did this by mounting back-to-back padeyes on the deck at the aft end of
the chain locker, with a turnbuckle going down to a piece of 3/4 or 1 inch
plywood glassed to the hull with epoxy resin. There are enough layers of
fiberglass connecting the plywood to the hull and wrapped around it, so
that even if the plywood wasn't there, the fiberglass could take the load.
Where the turnbuckle goes through the bottom of the chain locker, I glued
in a PVC pipe cap with a hole in the end, and sealed around the turnbuckle
with butyl to allow some flexibility. See pics below.

By the way, I spoke with a rigger who recommended using Dux, rather than
Dyneema, to avoid the creep problems of Dyneema.

I hope this helps,
Ray



On Fri, Apr 8, 2022 at 4:57 PM Max soto <maxsoto at gmail.com> wrote:

> Hi everybody, do any of you have a permanent innerstay deck fitting
> installed on the bow?  (Not the adjustable one on a track that came with
> the spinnaker package).
> If so, could you please send some pics of it and what’s strengthening it
> below the deck?
> Planning to install a removable Dyneema innerstay for the storm jib..
>
> Regards,
> Max Soto A.
> C38 #198 Estancia
> +506-8312-1367
> Alajuela, Costa Rica
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20220411/509b1e80/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Inner stay 5.JPG
Type: image/jpeg
Size: 101840 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20220411/509b1e80/attachment-0005.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Inner stay 1.JPG
Type: image/jpeg
Size: 124968 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20220411/509b1e80/attachment-0006.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Inner stay 2.JPG
Type: image/jpeg
Size: 159492 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20220411/509b1e80/attachment-0007.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Inner stay 6.JPG
Type: image/jpeg
Size: 66893 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20220411/509b1e80/attachment-0008.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Inner stay 4.JPG
Type: image/jpeg
Size: 127754 bytes
Desc: not available
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20220411/509b1e80/attachment-0009.jpe>


More information about the Listserve mailing list