[C38] does anyone know?

[William Knowles]

I used an ikea mount and pop rivited to mast, works great.
Bill Flying goose

On Sat, Sep 19, 2009 at 8:17 AM, Tom T. <tdtron at earthlink.net> wrote:

> Hi Patrick,
>
> Steve is right, the plywood bulkhead is solid plywood with a teak veneer.
> It is very strong and it should have no problem holding a modern flat
> screen TV.
>
> That forward bulkhead is structural on our boats and is designed for a lot
> of strain and the little weight of a TV will be insignificant if your
> bulkhead is still in good shape.
>
> If the bulkhead is not still in good shape, the TV is the least of your
> worries.  I had to replace that bulkhead on my 27 Catalina and it is not a
> job you want to do BUT if that bulkhead fails, it could cause a dismasting
> which can ruin your whole day.
>
> Tom Troncalli
>
>
>
> > [Original Message]
> > From: Steve Smolinske <SSmolinske at rainierrubber.com>
> > To: Catalina 38 Listserve <listserve at catalina38.org>
> > Date: 9/19/2009 1:45:57 AM
> > Subject: Re: [C38] does anyone know?
>  >
> > If your talking about the forward bulkhead that is shared with the head,
> I would imagine that it is marine plywod  underneath the veneer.
> >
> > ________________________________
> >
> > From: listserve-bounces at catalina38.org on behalf of Patrick Harpole
> > Sent: Fri 9/18/2009 9:56 PM
> > To: 'Catalina 38 Listserve'
> > Subject: [C38] does anyone know?
> >
> >
> >
> > I'd like to install a flat screen DVD player in salon.  Does anyone know
> if there are studs behind the paneling?   Is it OK to drill hole above
> table at the bow end?
> >
> > Patrick
> >
>
>
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>



-- 
W H Knowles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20090919/86ed8ea5/attachment-0001.htm>