[C38] Yanmar 3GM30 C38 exhaust rig

[D. R. Strong]

Phil: I have some images of our 3GM30 exhaust setup on Discreet Charm. 
Will try to post them on the site. If that bombs, I'll try to send them 
direct to your email address.
Don

Phil Gay wrote:
>
> Dear List,
>
>  
>
> I am upgrading the exhaust for my Yanmar 3GM30 from 1 5/8" to 2" as 
> recommended by Yanmar.  My problem lies in the height difference 
> between the bottom of the exhaust elbow and the top of the water lift 
> muffler.  With the 90 degree turn to take the exhaust across to the 
> muffler, there is only about 5 inches between the centerline of the 
> exhaust and the platform that the muffler sits on.  There are side 
> in/top out mufflers but I wonder about the opportunity for water to 
> back up into the hose between the elbow and the muffler.
>
>  
>
> Has anyone else solved this problem?
>
>  
>
> Phil Gay
>
> C38 049 Que Linda
>
> Everett, WA
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>   

-- 
Donald R. Strong
Professor
Section of Evolution and Ecology
University of California Davis
95616
530 752 7886

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20091208/c8aae046/attachment-0001.htm>