[C38] mainsheet traveler.
Robert Miller
chapuys at aol.com
Sun Apr 11 22:24:19 EDT 2010
Now that the blocks are off, maybe you should do as I did. Take them home
and do a really nice varnish job on them.
Bob
From: listserve-bounces at catalina38.org
[mailto:listserve-bounces at catalina38.org] On Behalf Of Joseph Launie
Sent: Sunday, April 11, 2010 7:09 PM
To: Catalina 38 Listserve
Subject: Re: [C38] mainsheet traveler.
Paul,
We were able to get the blocks off much easier than we feared. They were
just held on by 3 - 8 inch long 1/4 inch bolts each. We used the direct
approach of unbolting the nuts below decks and banging on he bottom of the
bolts with a hammer. We found that the blocks were only on the deck with
bedding compound. Joe
PAUL NOTTE wrote:
You guys are frightening me I was going to remove the blocks under the
traveler to refinish them.
Anyway Max you said you waxed your boat every three months or so , any
suggestions on wax for the northwest and application proceedures??
----- Original Message -----
From: Steve Smolinske <mailto:SSmolinske at rainierrubber.com>
<SSmolinske at rainierrubber.com>
Date: Friday, April 9, 2010 10:21 pm
Subject: Re: [C38] mainsheet traveler.
To: Catalina 38 Listserve <mailto:listserve at catalina38.org>
<listserve at catalina38.org>
> liguid wrench sprayed in overnight for a few days and then heat
> to the track, slight tapping and wiggling with vice grips should
> do the trick.
>
> ________________________________
>
> From: listserve-bounces at catalina38.org on behalf of Kenneth M. Sutto
> Sent: Fri 4/9/2010 1:55 PM
> To: Organization - listserve at catalina38
> Subject: [C38] mainsheet traveler.
>
>
> Here's my problem. The pully wheels on my traveler cars are
> broken. There are two on each car and are stacked one on top of
> the other. At the end of the traveler track on each side is a
> stainless pin through the track stopping the car from going off.
> On top of the pin and end of the track is a hard rubber cap
> which I pried off. I cannot remove the pins to get the cars off.
> I have tried just about everything I know. I am thinking of
> using heat on the pin then tapping them out with vice grips and
> a hammer. Any suggestions?
> I would send photos but something is wrong with my computer.
>
>
> Help!!
> Ken
> Sutto "Sundancer"
>
>
> ________________________________
>
> The New Busy is not the too busy. Combine all your e-mail
> accounts with Hotmail. Get busy.
>
<http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28
326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4>
<http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28
326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4>
>
_____
_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20100411/94411fd8/attachment-0001.htm>
More information about the Listserve
mailing list