[C38] Transmission Shift Linkage Bracket
Chapuys at aol.com
Chapuys at aol.com
Mon Aug 16 17:40:05 EDT 2010
Can anyone email that diegram?
Bob Miller
#113 in San Diego
In a message dated 8/16/2010 1:39:37 P.M. Pacific Daylight Time,
alex at spirinet.com writes:
Steve,
Thank you for the photo. It appears that I may have the same bracket
then. The previous owner(s) may have added a few pieces of wood when they
redid the cable for additional support and was set at the wrong angle. I
have the same RED morse control cable, I guess I just need the clip and screws
for the cable and then position it at 45 degrees on the bracket like the
diagram. Any chance you have a photo from the side showing the plate and
cable connecting to the shift lever? My existing cable has clevis style
connector at the end. I want to make it’s the proper one.
Thanks a lot. You have been a great help. The things you have done to
your boat is amazing!
-Alex
From: listserve-bounces at catalina38.org
[mailto:listserve-bounces at catalina38.org] On Behalf Of Steve Smolinske
Sent: Monday, August 16, 2010 12:38 AM
To: Catalina 38 Listserve
Subject: Re: [C38] Transmission Shift Linkage Bracket
Alex,
Not sure if this photo is stock equipment or if some fabricated it along
the way, but it works. One work of caution if you copy this, when
tightening the bolts into the transmission be careful not to strip the threads as I
did when working on it. I had to retap the hole and use a larger bolt.
Read the engine manual I believe there is a discussion on the proper
angle that the cable should be in reference to the shifting lever.
Steve
____________________________________
From: listserve-bounces at catalina38.org on behalf of Alex Ho
Sent: Sun 8/15/2010 5:12 PM
To: Catalina 38 Listserve
Subject: Re: [C38] Transmission Shift Linkage Bracket
If anyone in the community can provide the dimensions (L x W X D) of the
bracket, it would be greatly appreciated. It does not appear that the part
if available anymore. Any photos would be greatly appreciately for frame
of reference to rebuild mine.
Thank you..
____________________________________
From: listserve-bounces at catalina38.org [listserve-bounces at catalina38.org]
on behalf of Alex Ho [alex at spirinet.com]
Sent: Friday, August 13, 2010 10:40 PM
To: listserve at catalina38.org
Subject: [C38] Transmission Shift Linkage Bracket
It appears that my boat was jury-rigged with a non-original bracket and
with some supports. I am having some shifting problems now and was
wondering if someone might know where to order a new bracket that was design for
the tranmission? I believe this is the original HURTH transmission.
-Alex
1982 CAT 38
Shoal Draft
_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20100816/1c7b0aeb/attachment-0001.htm>
More information about the Listserve
mailing list