[C38] Mainsheet Wiring Upgrade Article for awhile back?

[Joseph Launie]

Steve,
     Thanks - I am looking for something to add on to my existing 
binnacle guard to make it taller. I have my radar, gps and wind 
instrument mounted on the existing binnacle guard. Pulling out the old 
binnacle guard means tearing out a lot of wiing.  Joe


> Joe, the two defender links show single mount pods and then additional options on taller binnacle guards,  Edson also has nice single  pod mounts for lower on the guard if you have room.   Edson also has taller binnacle guards, but I believe Edson tends to be more expensive.
>
> I mounted my chart plotter above the compass and added a taller angled guard so that there is still room to grab the guard without grabbing the instrument, it is angled slightly forward for visibility of the screen, you can see it pretty good at our blog in the video from oregon offshore this year.  Hope this helps.
>
> http://www.defender.com/category.jsp?path=-1|344|320737|296565&id=609772
>
> http://www.defender.com/category.jsp?path=-1|344|320737|296565&id=610393
>
> http://www.edsonmarine.com/marinestore/index.php?main_page=index&cPath=87_99&zenid=e4e83f6974a1e760b7c5d6cf20c90b14
>
> http://peregrine-cat38.blogspot.com/
>
>
> Steve
> #312 Peregrine
> Seattle
>
>
> ________________________________
>
> From: listserve-bounces at catalina38.org on behalf of Joseph Launie
> Sent: Mon 8/22/2011 8:57 PM
> To: listserve at catalina38.org
> Subject: Re: [C38] Mainsheet Wiring Upgrade Article for awhile back?
>
>
> Steve,
>      I have a related problem.  I mounted my Garmin wind read-out at the top of my Edson binnacle guard. Now everyone grabs it as they go by. I would like to add an additional higher guard to protect the instrument and give a handhold because one is needed there. Any suggestions? Joe
>
>
>
>
>
> 	Tom, Steve;
> 	I'm going to be doing a wiring up grade as well...it would be great if you could put the article on the website or in Mainsheet. Thanks
>
> 	Steve R.
> 	s/v Tittravate?
> 	On Aug 21, 2011 11:02 PM, "Alex Ho"<alex at spirinet.com>  wrote:
> 	>
> 	>  Hi Tom,
> 	>
> 	>
> 	>
> 	>  Thanks.  Great to get things from the original source J.   My email is alex at spirinet.com
> 	>
> 	>
> 	>
> 	>  -Alex
> 	>
> 	>
> 	>
> 	>  From: listserve-bounces at catalina38.org [mailto:listserve-bounces at catalina38.org] On Behalf Of tdtron at earthlink.net
> 	>  Sent: Sunday, August 21, 2011 9:52 PM
> 	>  To: Catalina 38 Listserve
> 	>  Subject: Re: [C38] Mainsheet Wiring Upgrade Article for awhile back?
> 	>
> 	>
> 	>
> 	>  Hello Alex,
> 	>
> 	>
> 	>
> 	>  I don't have the original Mainsheet article handy but since I was the author of that article, I actually still have the drafts that the article came from.  If you will give me your email address, I will forward them to you.
> 	>
> 	>
> 	>
> 	>
> 	>
> 	>  Tom Troncalli
> 	>
> 	>  Resident Nerd
> 	>
> 	>
> 	>
> 	>
> 	>>
> 	>>  ----- Original Message -----
> 	>>
> 	>>  From: Alex Ho
> 	>>
> 	>>  To: Listserve at catalina38.org
> 	>>
> 	>>  Sent: 8/21/2011 9:22:07 PM
> 	>>
> 	>>  Subject: [C38] Mainsheet Wiring Upgrade Article for awhile back?
> 	>>
> 	>>
> 	>>
> 	>>  Anyone know where I can find a reprint of this Catalina Mainsheet article that shows how to rewiring the harness so that we no longer have the alternator route through all the instruments?   Looking to rewire to use a voltmeter instead and route the alternator directly to the battery banks.
> 	>>
> 	>>
> 	>>
> 	>>  Thanks,
> 	>>
> 	>>
> 	>>
> 	>>  Alex Ho
> 	>>
> 	>>  #183
> 	>>
> 	>>
> 	>>
> 	>>
> 	>>
> 	>>
> 	>
> 	>
> 	>  _______________________________________________
> 	>  Listserve mailing list
> 	>  Listserve at catalina38.org
> 	>  http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> 	>
> 	
>
> 	
> 	_______________________________________________
> 	Listserve mailing list
> 	Listserve at catalina38.org
> 	http://catalina38.org/mailman/listinfo/listserve_catalina38.org
> 	
>
>    
>
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20110823/bc6ed285/attachment-0001.htm>