[C38] Watermakers

Thu Sep 15 15:13:15 EDT 2011

Craig, we installed a Katadyn 40E in the V Berth on top of the water tank,
added a couple of 1X4's to hold it in place, we had a thru hull installed in
09 for it.  We plumbed it into the head sink with an extra faucet and a
valve to send water back into the water tank.  This unit only makes about a
gallon an hour but uses only 4 amps.  It was an easy install, follow all of
the directions and do not take any shortcuts.  The 80E makes more water and
uses more power.  We didn't have any problems with it as long as we followed
proper procedures with it.

Best regards,

Larry Malmberg

7231 Boulder Avenue Suite 507
Highland, CA 92346 PI 15211
Telephone  909-208-1847
FAX           909-991-7568

E Mail  Larrypi at roadrunner.com

Life is short, Break the rules, Forgive quickly, Kiss slowly, Love truly,
Laugh uncontrollably, And never regret anything that made you smile..

"The American Indians found out what happens when  you don't control
immigration"

"Life is not a journey to the grave with the intention of arriving safely in
a pretty and well preserved body, but rather to skid in broadside,
thoroughly used up, totally worn out, and loudly proclaiming; WOW-- What a
Ride!"

CONFIDENTIALITY NOTICE: This electronic message, including any attachments,
is for the sole use of the intended recipient(s) and may contain
confidential and privileged information. Any unauthorized review, copying,
use, disclosure or distribution of any parts of the contents of this
message/information is prohibited by federal law. Attempts to intercept this
message are in violation of Title 18 USC 2511(1) of the Electronic
Communications Privacy Act (ECPA), which subjects the interceptor to fines,
imprisonment and/or civil damages. If you are not the intended recipient,
please contact the sender by reply e-mail and destroy all copies of the
original message.

  _____  

From: listserve-bounces at catalina38.org
[mailto:listserve-bounces at catalina38.org] On Behalf Of Craig Steinkraus
Sent: Thursday, September 15, 2011 11:37 AM
To: Catalina 38 Listserve
Subject: [C38] Watermakers

Has anyone ever installed a watermaker on their C-38. If so, I would like to
know what type and where they installed it. As we plan on taking off for
blue waters and white sand next spring, any help would be appreciated!

Thanks

Craig
"Wings"  C-38 # 280

----- Original Message ----- 
From: Richard West <mailto:rw at idea-asylum.com>  
To: Catalina 38 Listserve <mailto:listserve at catalina38.org>  
Sent: Thursday, September 15, 2011 11:08 AM
Subject: Re: [C38] Skegs (not kegs!)

Was this link on the list a couple of days ago?  Maybe I found it somewhere
else, I don't remember.  Anyway, here's a great site that shows the Yankee
38 rudder clearly. 

http://sparkmanstephens.blogspot.com/2011/03/design-2094-c2-yankee-38.html

Rich, Legacy, #360, Los Angeles

On Wed, Sep 14, 2011 at 6:16 PM, Max Soto <maxsoto at gmail.com> wrote:

I've never seen a Yankee 38, but  I read that one of the modifications that
Frank Butler did to the 38 was replacing the skeg mounted rudder for a spade
rudder. Also said that the mast was replaced for a taller one with small
boom, but still, hull #1 came with the Yankee  mast... So, who knows...
Could there be a 38 with skeg rudder??    We have noticed many differences
between early and later models during this year, so who knows... Butler,
perhaps??
Regards,
Max
Sent from my iPod

On Sep 14, 2011, at 18:29, "tdtron at earthlink.net" <tdtron at earthlink.net>
wrote:

> I sold my 38 but it was a 1981, hull  #95, shoal draft with a skeg mounted
> cutlass bearing but the rudder was the same as on the deep fin models.
The
> skeg mounted cutlass gave some additional keel surface to compensate for
> the shorter keel but I don't think there was any difference in the rudder.
>
> Does anyone know if the Yankee 38 had a skeg rudder?
>
> Tom Troncalli
> Recovering ex-Catalina 38 owner
>
>
>> [Original Message]
>> From: John Felkins <jrfelkins at gmail.com>
>> To: listserve at catalina38.org <listserve at catalina38.org>
>> Date: 9/14/2011 5:31:52 PM
>> Subject: [C38] Skegs (not kegs!)
>>
>> Are there certain years that the Cal38 was built with a skeg rudder? I'm
> pretty sure I've seen a pic of one but don't know if it's a mod. Thanks!
>>
>>
>> John Felkins P.E.
>> TN CEI Leader
>> KCI Technologies, Inc.
>> 7003 Chadwick Drive, Ste. 343 Brentwood, TN 37209
>> Phone: 615-594-9127
>> Fax: 888-854-4780
>> www.kci.com
>>
>>
>> _______________________________________________
>> Listserve mailing list
>> Listserve at catalina38.org
>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
>
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org

_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org

  _____  

_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20110915/6b2658da/attachment-0001.htm>